Shop
Showing all 14 results
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″ Ah 24 Grit – Type 27
Pferd 61301 Grinding Wheel
The PFERD Performance Line SG-Elastic grinding wheels for aluminum are aggressive and offer non-loading grinding performance on all aluminum and all soft metals. Paraffin-free design leaves a residue-free surface for immediate welding without secondary surface cleaning operation. These wheels are recommended for soft, tough and hard grades of aluminum and offer an excellent balance of aggressive removal and god service life.
Specifications:
▪ Abrasive: Premium Aluminum Oxide
▪ Workpiece Materials: Aluminum, Copper, Brass, Bronze
▪ Application: Weld Grinding, Chamfering, Deburring, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 06-B 458 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 80
• Shape: Flat
• Max RPM: 13,300
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
POLIFAN® Mini Quick Change Flap Discs – Aluminum Oxide A – Type CDR
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
Mini flap discs, particularly useful for weld dressing in hard-to-reach areas. These tools excel in performance when compared to plain coated abrasive discs in terms of service life and grinding performance.
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 4-1/2″ X 1/8″ Cut/Grinding Wheel 7/8″Ah 24 Grit
Walter 08-B 462 HP Combo Wheel
The Walter high performance all in one cutting and grinding 1/8” wheels set new standards for performance in combined depressed center wheels (for portable angle grinders). They are specially reinforced to withstand the stress in off-hand cutting operations. Whether cutting, grooving, notching or light grinding, these wheels are guaranteed to give you the longest wheel life, fastest material removal and maximum safety.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting, Grooving, Notching or Light Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inch
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/8″ Notching Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63429 Pipeline Notching Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for light grinding and cutting and all facets of steel and ferrous metal production and fabrication. A combination of premium aluminum oxide grain, high edge stability, and tight dimensional tolerances result in highly productive nothing applications. These wheels are designed for use on their edge, perpendicular to the workpiece. Optimal results are achieved with high-powered angle grinders.
Specifications:
• Abrasive: Special Aluminum Oxide A
• Workpiece Materials: Steel, Stainless Steel
• Application: Edge Grinding, Root Pass Cutting & Notching
• Diameter: 6 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 30
• Shape: Depressed Center
• Max RPM: 10,200
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63405 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
• Diameter: 4 1/2 Inches
• Thickness: 1/8 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/8″ Pipeline Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 63404 Pipeline Wheel
The PFERD Depressed Center SG Elastic Cutting/Grinding Pipeline wheels are designed for grinding and cutting pipeline root pass, weld and flame cut grinding and all facets of steel and ferrous metal production and fabrication. These high performance wheels feature long service life for reduced wheel changes, fast grinding and cutting root pass, and excellent edge-holding characteristics.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Chamfering, Deburring, Root Pass Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/8
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 9″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 9″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61564 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 9 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61562 Grinding Wheel
The PFERD Special Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 6″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61555 Grinding Wheel
The PFERD Performance Line SG-Plus grinding wheels are high-performance blended zirconia grinding wheels that offer fast removal rates and service life that outlasts aluminum oxide wheels 2 to 1. Optimal results are achieved with high powered angle grinders.
Specifications:
▪ Abrasive: Zirconia Alumina & Aluminum Oxide
▪ Workpiece Materials: Steel
▪ Application: Weld Grinding, Edge Grinding
▪ Diameter: 6 Inches
▪ Thickness: 1/4 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 10,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 7/8″Ah 24 Grit – Type 27
Pferd 61002 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 24
▪ Shape: Depressed Centre
▪ Max RPM: 12,200
Pferd 4-1/2″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 4-1/2″ X 1/4″ Grinding Wheel 5/8-11 Thd 24 Grit – Type 27
Pferd 61001 Grinding Wheel
The PFERD Universal Line PSF grinding wheels are general purpose grinding wheels for universal grinding applications on steel and stainless steel. These wheels are designed to achieve a fast stock removal with minimum contact pressure.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Surface Grinding, Fillet Weld Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 1/4
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 42518 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 80
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A