Shop
Showing 1–20 of 48 results
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark ER70S-6 Carbon Steel MIG Wire
Weldmark® By ESAB® 70S-6 MIG Wire
For work with filler metals, Weldmark® By ESAB® 70S-6 MIG Wire contains higher levels of deoxidizers (manganese and silicon) and lower carbon levles as compared to a general purpose wire. The high content of deoxidizers allow welding over heavier amounts of dirt, rust and mill scale while providing a more fluid puddle and smoother bead profile.
Weldmark® By ESAB® 70S-6 MIG Wire has excellent feedability, consistency and exceptional arc characteristics. This wire delivers a very stable arc, resulting in less spatter, less clean up time and improved performance. This is a perfect choice when seeking a wire for semi-automatic, automatic and robotic welding applications.
AWS Classification – AWS SFA5.18; ER70S-6
Classifications/Approvals – Certified by C.W.B.: CSA W48B – G49A3CG6 ASME SFA 5.18 ER70S-6
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 Steel TIG Rod 1# tube
Weldmark ER70S2 TIG Rod
Weldmark is a premium carbon steel multiple deoxidized wire. Produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2
ESAB Dual Shield 7100 Ultra E71T-1CH8/E71T-9MD Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool
ESAB Dual Shield 7100 Ultra E71T-1CH8/E71T-9MD Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Lincoln SuperArc L-56 ER70S-6 Copper Coated Carbon Steel MIG Wire
Weldmark ER308L Stainless Steel TIG Rod 1/16″X 36″ 1# tube
Weldmark ER308L Stainless Steel TIG Rod 1/16″X 36″ 1# tube
Weldmark ER308L06301T TIG Rod
Weldmark 308L Stainless Tig Rod. Similar usage as 308, but the 0.03% maximum carbon content increases resistance to intergranular corrosion.
Specifications:
· Diameter: 1/16”
· Length: 36”
· Weight: 1# Tube
ESAB Dual Shield 710X E71T-1C-DH8/1M/E71T-9C-DH8/9M Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool
ESAB Dual Shield 710X E71T-1C-DH8/1M/E71T-9C-DH8/9M Gas Shielded Flux Core Carbon Steel Tubular Wire .045 33# Spool
Weiler Stainless Steel Small Hand Wire Brush
Weiler Stainless Steel Small Hand Wire Brush
ESAB Dual Shield II 70 Ultra E71T-1M/E71T-9M/E71T-12M Gas Shielded Flux Core Wire
ESAB Dual Shield II 70 Ultra E71T-1M/E71T-9M/E71T-12M Gas Shielded Flux Core Wire
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Lincoln Super Arc L-59 ER70S-6 Copper Coated Carbon Steel MIG Wire .035 44# Spool
Specifications
Diameter: | .035 |
Package: | 44 lb. Spool |
SKU: | LINED032366 |
Lincoln SuperArc LA-90 ER80S-D2/ER90S-D2/EA3K Low Alloy Steel MIG Wire .035 33# Spool
Lincoln SuperArc LA-90 ER80S-D2/ER90S-D2/EA3K Low Alloy Steel MIG Wire .035 33# Spool
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
Diameter: |
1″ |