Shop
Showing 1–20 of 21 results
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Model PX15-145 1/16” – 5/64” X 15’ Liner
Compatible with MIG Gun Profax 1260 Self Shielded Flux Core
Bernard Universal Liner 1/16″ X 15′
Bernard Universal Liner 1/16″ X 15′
Compatible with MIG Guns:
▪ Legacy Q
▪ Legacy S
▪ Legacy T
▪ BTB MIG
▪ TGX Series
Miller .030 – .035 X 15′ Liner For M-Series MIG Guns
Miller .030 – .035 X 15′ Liner For M-Series MIG Guns
15 ft replacement gun cable monocoil liner designed for .030-.035 inch (0.8-0.9 mm) wires. Liners help ensure efficient feeding of the wire from the spool, through the gun and to the contact tip. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
Best Welds .030-.035 Tweco Conduit
Best Welds .030-.035 Tweco Conduit
Best Welds Tweco Model 42-30-35-15 .030” – .035” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #1
▪ Professional #2
Best Welds .035-.045 Tweco Conduit
Best Welds .035-.045 Tweco Conduit
Best Welds Tweco Model 44-3545-15 .035” – .045” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #3
▪ Professional #4
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 42514 Quick Change Disc
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Aluminum Oxide A:
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
Tweco Teflon Liner 1/16″ for Tweco No 3 & No 4
Tweco Teflon Liner 1/16″ for Tweco No 3 & No 4
Tweco Model 44TF-116-15 1/16” X 15’ Teflon Liner
Compatible with MIG Guns:
▪ Professional #3
▪ Professional #4
Tregaskiss Liner .035-.045 X 15′
Tregaskiss Liner .035-.045 X 15′
Tregaskiss Model 415-45-03 .035” – 3/64” X 15’ Liner
Compatible with MIG Guns:
▪ Tregaskiss MIG guns
▪ Bernard BTB
▪ Bernard TGX
▪ Bernard T-Gun
▪ Clean Air Fume Extraction
Tregaskiss 8″ Bronze Jump Liner for .030″ – 1/16″ Wire
Tregaskiss 8″ Bronze Jump Liner for .030″ – 1/16″ Wire
Tregaskiss™ Conventional Liners for MIG welding guns are made of high carbon music wire for smooth wire feed and long life.
Tregaskiss Model 415-25 conventional polymer liners for aluminum wire for 0.030″ – 1/16″ wire, 8″ length; bronze jump liner for use with liner
Best Welds .035-.040″ Tweco 15′ Liner
Best Welds .035-.040″ Tweco 15′ Liner
Best Welds Tweco Model 35-40-15 .035” – .040” X 15’ liner.
Compatible with Tweco MiniMIG guns.
Best Welds .030″-.035″ Miller Style Liner
Best Welds .030″-.035″ Miller Style Liner
15 ft replacement gun cable monocoil liner designed for .030-.035 inch (0.8-0.9 mm) wires. Liners help ensure efficient feeding of the wire from the spool, through the gun and to the contact tip. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
· 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure
· PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes
· Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling
· Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys
3M™ Cubitron© II Fibre Disc 987C offers significant gains in productivity on medium to heavy-duty operations with our exceptionally high-performing 3M Precision Shaped Grain combined with a stiff fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other fiber discs””all with less grinding pressure.
3M™ Cubitron© II Fibre Disc 987C is suitable for use on almost all metals and excels in stainless steel and other nickel alloy applications. It is ideal for weld removal, beveling, removing mill scale, pits and imperfections, and more. Because 3M Precision Shaped Grain generates an exceptionally high cut-rate with less pressure, operators can finish tough tasks faster and with less fatigue. A grinding aid incorporated on the disc makes this an outstanding product for all types of metal””it helps keep the disc cooler on stainless steel and heat-sensitive metals such as nickel alloys and titanium, thereby reducing metal discoloration/oxidation and the chance of heat-related stress cracks. Moreover, because the abrasive itself stays cooler and sharper, our 3M Precision Shaped Grain discs last significantly longer than conventional ceramic grain discs, delivering a lower cost per grind with fewer disc changes.
Our 3M™ Cubitron© II products have raised the bar for high-performing abrasives. 3M Precision Shaped Grain outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.
To create 3M Precision Shaped Grain, our engineers started with 3M™ Ceramic Abrasive Grain and used proprietary technology to form the grains into triangular structures and electrostatically orient them on the backing to form sharp peaks that maximize cutting potential. These peaks slice cleanly through metal, rather than gouging or plowing as traditional abrasives do, and continuously self-sharpen as the points break off. This generates a super-fast cut and lessens heat build-up due to friction, reducing heat-related stress cracks and discoloration.
3M Precision Shaped Grain also wears evenly, and because the abrasive itself stays cooler and sharper, 3M™ Cubitron© II products last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications.
Fiber discs are heavy-duty discs ideal for weld removal, grinding, and blending large and small areas of metal surfaces. They feature a tough, stiff backing made from vulcanized fiber that resist wear and can handle tough grinding applications.
Specifications | |
Abrasive Material | Precision Shaped Ceramic Grain |
Abrasive Trade Name | Cubitron II |
Applicable Materials | Cobalt & Nickel Alloy, Stainless Steel, Titanium |
Applications | Grinding; Metal Stock Removal |
Body Material | Fiber |
Bond | Resin |
Brand | 3M ABRASIVE |
Color | Orange |
Dia. [Nom] | 4 1/2 in |
Grit | 60 |
Mounting | Threaded Hole |
Speed [Max] | 13,300 rpm |
Style | 987C |
Type | Fibre Disc |
Used With | Right Angle Grinder |
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: |
7″ |
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: | 4-1/2″ |
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 42520 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 120
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 42518 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 80
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A