Shop
Showing 1–20 of 27 results
Hobart FabTuf 960 Gas Shielded Flux Core Hard Face Alloy Steel Tubular Wire .045 33# Spool
Hobart FabTuf 960 Gas Shielded Flux Core Hard Face Alloy Steel Tubular Wire .045 33# Spool
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasive 4-1/2″ Z40 Quickmount Greenback Plastic 5/8-11 Thd 40 Grit – Type 27
Pearl Abrasives Max4540ZGQ Greenback Flap Disc
The Pearl Abrasives Greenback Zirconia Flap Disc features a fiberglass reinforce disc providing more strength and durability. The exclusive outer coating makes the disc run cooler and last longer as well as providing lubrication to prevent burn marks and discoloration of the finished material. The Greenback’s nylon Easy Trim backing allows you to shave off the green backing as the flaps wear down, exposing more flap length.
Specifications:
▪ Abrasive: Zirconia
▪ Workpiece Materials: Steel, Stainless Steel, Cast Iron
▪ Application: Weld Grinding, Blending, Deburring, Surface Grinding
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 13,300
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 5/8-11 Thd 40 Grit Medium Radius
Pferd 67212 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
• Abrasive: Zirconia Alumina Z
• Workpiece Materials: Steel, Stainless Steel
• Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
• Diameter: 4 1/2 Inches
• Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Curve
• Max RPM: 13,300
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
PFE 31062 Mounted Point
Hardness grade R mounted points are made of grey silicon carbide in a vitrified bond. These products are noted for their hardness and durability.
Advantages:
▪ Hardness grade R tools are ideally suited for heavy-duty edge grinding on castings. They are distinguished by their high edge-holding capability, long service life and low wear.
▪ Due to their special edge-holding properties, hardness grade R mounted points can also be used economically with low RPM power tools.
▪ In edge grinding operations, hardness grade R mounted points perform best at a recommended peripheral speed of 6,000 – 9,800 SFPM. For surface grinding we recommend a peripheral speed of 4,000 – 6,000 SFPM. Suitable drive systems include flexible shafts and electric or air-powered straight grinders.
Specifications:
▪ Shape: A11
▪ Diameter: 7/8”
▪ Length: 2”
▪ Shank Diameter: ¼”
▪ Grit: 30
▪ Max RPM: 19,860
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 5″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 1
Pferd 62182 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 5 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Stoody 965-G Gas Shielded Semi-Automatic Hard Face Alloy Steel Tubular Wire .045 33# Spool
Stoody 965-G Gas Shielded Semi-Automatic Hard Face Alloy Steel Tubular Wire .045 33# Spool
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 60 Grit
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 4-1/2″ Polifan Curve Flap Disc 7/8″Ah 40 Grit Medium Radius
Pferd 67192 Polifan Curve Flap Disc
The PFERD Special Line SG-Plus Polifan SGP Zirkon Curve flap discs are a PFERD innovation designed to quickly achieve a smooth, consistent surface finish on fillet welds. The unique radial shape offers a superior solution for this common task. These discs are produced with a premium zirconia material that provides a combination of long service life and high stock removal rates in demanding applications.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Fillet Weld Grinding, Chamfering, Deburring, Contour Grinding
▪ Diameter: 4 1/2 Inches
▪ Thickness: 9/16 Inches – Best for 3/16” Fillet Weld Widths
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Curve
▪ Max RPM: 13,300
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 4-1/2″ Flap Disc 5/8-11 Thd 80 Grit
Walter 06-B 458 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 80
• Shape: Flat
• Max RPM: 13,300
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
CGW Abrasives 4-1/2″ Z3 Zirconia Flap Disc – 7/8″Ah 80 Grit – Type 27
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America SB-5DC Carbide Burr
Drill America 1/2” X 1” Cylindrical End Cut Carbide Burr 1/4 Shank
Specifications:
▪ Size: 1/2”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 1”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Cylindrical, End-Cut Double Cut
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America cylindrical end cut carbide bur ¼”
Stoody 101HC-G Gas Shielded Semi-Automatic Hard Face Alloy Steel Tubular Wire .045 33# Spool
Stoody 101HC-G Gas Shielded Semi-Automatic Hard Face Alloy Steel Tubular Wire .045 33# Spool
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 4-1/2″ Trimmable Flap Disc 40 Grit
Walter 06-B 454 Enduro-Flex Flap Disc
The Walter Enduro-Flex one-step finishing discs not only meet but surpass the challenges that the metal fabricating and finishing industry faces on a daily basis. With the new ultra sharp and refined zirconium grain, the Enduro-Flex finishing disc will stay sharper for a longer period of time while removing more material faster. In addition, a special top coat continuously cools and lubricates the disc for smooth, vibration-free grinding and sanding from start to finish. Moreover, there is no need to discard the disc when the flap overhang is worn down to the backing because the Enduro-Flex disc can be restored to like-new performance by reducing the diameter of the Eco-Trim backing.
• Abrasive: Zirconia
• Workpiece Materials: Steel, Stainless Steel
• Application: Weld Grinding & Finishing, Surface Finishing
• Diameter: 4 1/2 Inches
• Arbor Hole/Thread Size: 5/8-11 Thread
• Grit: 40
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 6″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 63071 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 10,200
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 6″ Polifan Flap Disc 5/8-11 Thd 60 Grit – Type 1
Pferd 63057 Polifan Flap Disc
The PFERD Universal Line PSF Polifan PSF Zirkon flap discs are general purpose flap discs for multipurpose, demanding grinding applications. Built with zirconia coated material for durable performance, even in demanding grinding applications. These discs are recommended for optimal stock removal rates with high powered angle grinders used at higher application pressures.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 6 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 60
▪ Shape: Flat
▪ Max RPM: 10,200
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 7″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62288 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 7 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 8,600
Pferd 4-1/2″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 4-1/2″ Polifan Flap Disc 5/8-11 Thd 40 Grit – Type 1
Pferd 62276 Polifan Flap Disc
The PFERD Performance Line SG Zirkon Polifan Flap Discs are highly durable for demanding applications. These wheels are coated in a high-end zirconia material, which provides sustained high stock removal rates throughout a long service life. These wheels are able to deliver optimal performance on high powered angle grinders at higher contact pressures and/or steeper work angles.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 5/8-11 Thread
▪ Grit: 40
▪ Shape: Flat
▪ Max RPM: 13,300
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit – Type 29
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 60 Grit – Type 29
Pferd 62223 Polifan Flap Disc
The PFERD Performance Line SG Polifan Z-SG Power flap discs are some of the most efficient flap discs available. This line of flap discs feature significantly longer tool life, higher aggressiveness throughout the entire tool life, and a premium zirconia coating for high stock removal rates.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 60
▪ Shape: Conical
▪ Max RPM: 13,300
▪
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 4-1/2″ Polifan Flap Disc 7/8″Ah 40 Grit – Type 29
Pferd 62222 Polifan Flap Disc
The PFERD Performance Line SG Polifan Z-SG Power flap discs are some of the most efficient flap discs available. This line of flap discs feature significantly longer tool life, higher aggressiveness throughout the entire tool life, and a premium zirconia coating for high stock removal rates.
Specifications:
▪ Abrasive: Zirconia Alumina Z
▪ Workpiece Materials: Steel, Stainless Steel
▪ Application: Surface Grinding, Weld Grinding, Blending, Chamfering, Deburring
▪ Diameter: 4 1/2 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 40
▪ Shape: Conical
▪ Max RPM: 13,300