Shop
Showing all 7 results
J.W. Harris Stay Clean Paste Flux – 4oz
J.W. Harris Stay Clean Paste Flux – 4oz
Stay-Clean Paste Soldering Flux is designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean Paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.
Specifications:
|
Package Size |
4 oz. Bottle |
J.W. Harris Solar Flux Type B 1# Can
J.W. Harris Solar Flux Type B 1# Can
Solar Flux is a complex chemical compound in the form of a very fine powder. Solar Flux is mixed with alcohol (methanol/methyl alcohol preferred) and brushed on the weld joint. It is formulated to shield the back of the weld joint from oxygen, dissipate heat and unwanted oxides, and to clean the surface of the metal. It will aid in the flow of filler metal over base metal and form a protective barrier to prevent re-oxidation and heat scale.
Type B for stainless steel, (except 309, 310), precipitation hardening steels, chrome-moly steels, other alloy steels with nickel content below 25%
Specifications:
| Package Size | 1 lb Can |
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
PFE 31062 Mounted Point
Hardness grade R mounted points are made of grey silicon carbide in a vitrified bond. These products are noted for their hardness and durability.
Advantages:
▪ Hardness grade R tools are ideally suited for heavy-duty edge grinding on castings. They are distinguished by their high edge-holding capability, long service life and low wear.
▪ Due to their special edge-holding properties, hardness grade R mounted points can also be used economically with low RPM power tools.
▪ In edge grinding operations, hardness grade R mounted points perform best at a recommended peripheral speed of 6,000 – 9,800 SFPM. For surface grinding we recommend a peripheral speed of 4,000 – 6,000 SFPM. Suitable drive systems include flexible shafts and electric or air-powered straight grinders.
Specifications:
▪ Shape: A11
▪ Diameter: 7/8”
▪ Length: 2”
▪ Shank Diameter: ¼”
▪ Grit: 30
▪ Max RPM: 19,860
J.W. Harris Stay Clean Aluminum Flux
J.W. Harris Stay Clean Aluminum Flux
The Harris Stay-Clean Aluminum Flux is a liquid flux for use with aluminum soldering. Use with Al-Solder 500. Works to join aluminum to dissimilar metals.
Typical Application: Recommended for soldering aluminum and aluminum to other metals.
Size: 4 oz Bottle
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America SB-5DC Carbide Burr
Drill America 1/2” X 1” Cylindrical End Cut Carbide Burr 1/4 Shank
Specifications:
▪ Size: 1/2”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 1”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Cylindrical, End-Cut Double Cut
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America cylindrical end cut carbide bur ¼”
Drill America 3/8″ X 3/4″ Tree Pointed End Carbide Burr
Drill America 3/8″ X 3/4″ Tree Pointed End Carbide Burr
Drill America SG-3DC Carbide Burr
Drill America 3/8” X 3/4” Tree Pointed End Carbide Burr 1/4 Shank
Specifications:
▪ Size: 3/8”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 3/4”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Tree, Pointed-End Double Cut