Shop
Showing all 9 results
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
PFE 31062 Mounted Point
Hardness grade R mounted points are made of grey silicon carbide in a vitrified bond. These products are noted for their hardness and durability.
Advantages:
▪ Hardness grade R tools are ideally suited for heavy-duty edge grinding on castings. They are distinguished by their high edge-holding capability, long service life and low wear.
▪ Due to their special edge-holding properties, hardness grade R mounted points can also be used economically with low RPM power tools.
▪ In edge grinding operations, hardness grade R mounted points perform best at a recommended peripheral speed of 6,000 – 9,800 SFPM. For surface grinding we recommend a peripheral speed of 4,000 – 6,000 SFPM. Suitable drive systems include flexible shafts and electric or air-powered straight grinders.
Specifications:
▪ Shape: A11
▪ Diameter: 7/8”
▪ Length: 2”
▪ Shank Diameter: ¼”
▪ Grit: 30
▪ Max RPM: 19,860
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America SB-5DC Carbide Burr
Drill America 1/2” X 1” Cylindrical End Cut Carbide Burr 1/4 Shank
Specifications:
▪ Size: 1/2”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 1”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Cylindrical, End-Cut Double Cut
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America cylindrical end cut carbide bur ¼”
ESAB Coreshield 11 E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire 1/16″ 33# Spool
ESAB Coreshield 11 E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire 1/16″ 33# Spool
Lincoln Innershield NR-212 E71TG-G Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-212 E71TG-G Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-211-MP E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-211-MP E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire
Drill America 3/8″ X 3/4″ Tree Pointed End Carbide Burr
Drill America 3/8″ X 3/4″ Tree Pointed End Carbide Burr
Drill America SG-3DC Carbide Burr
Drill America 3/8” X 3/4” Tree Pointed End Carbide Burr 1/4 Shank
Specifications:
▪ Size: 3/8”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 3/4”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Tree, Pointed-End Double Cut