Shop
Showing 1–20 of 31 results
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard Model N1C58HQ Quik series 1 with 5/8″ bore, heavy duty, plated copper; threaded nozzle
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-62R, 1/8” recess, 5/8” Thread-on Welding Nozzle.
Nozzle is compatible with:
▪ Magnum PRO 250L
▪ Magnum PRO 350L
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-50R, 1/8” recess, 1/2” Thread-on Welding Nozzle
Nozzle is compatible with:
· Magnum PRO 250L
· Magnum PRO 350L
ESAB 5/8″ Nozzle For MT Series MIG Guns
ESAB 5/8″ Nozzle For MT Series MIG Guns
ESAB Standard Duty 5/8” Welding Nozzle
Nozzle is compatible with:
▪ MT-200
▪ MT-400
▪ ST-23A
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Self-Insulated MIG Gun Nozzles, 1/2 in Bore, 1/8 in Recess
Compatible with MIG Guns:
· Tweco 135Amp Mini
· Tweco No. 1
ESAB 40 Amp Nozzle For PT-32 Plasma Torch
ESAB 40 Amp Nozzle For PT-32 Plasma Torch
ESAB 60 Amp Nozzle For Plasmarc PT-38/PowerCut 900 Plasma Torch
ESAB 60 Amp Nozzle For Plasmarc PT-38/PowerCut 900 Plasma Torch
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
Pferd A11 Vitrified Mounted Point Silicon Carbide Grit 30 – Medium
PFE 31062 Mounted Point
Hardness grade R mounted points are made of grey silicon carbide in a vitrified bond. These products are noted for their hardness and durability.
Advantages:
▪ Hardness grade R tools are ideally suited for heavy-duty edge grinding on castings. They are distinguished by their high edge-holding capability, long service life and low wear.
▪ Due to their special edge-holding properties, hardness grade R mounted points can also be used economically with low RPM power tools.
▪ In edge grinding operations, hardness grade R mounted points perform best at a recommended peripheral speed of 6,000 – 9,800 SFPM. For surface grinding we recommend a peripheral speed of 4,000 – 6,000 SFPM. Suitable drive systems include flexible shafts and electric or air-powered straight grinders.
Specifications:
▪ Shape: A11
▪ Diameter: 7/8”
▪ Length: 2”
▪ Shank Diameter: ¼”
▪ Grit: 30
▪ Max RPM: 19,860
Bernard 5/8″ Centerfire Small Nozzle
Bernard 5/8″ Centerfire Small Nozzle
Bernard Model NS-5818C Centerfire series 5/8″ Bore, 1/8″ Recess, .875″ O.D, Copper small nozzle.
For use with Bernard Centerfire DS-1 small gas diffuser.
Nozzle is compatible with Bernard MIG Gun series:
▪ BTB series
▪ Clean Air Series
▪ Dura-Flex
▪ Fixed Liner Series
▪ FILTAIR Fume Extraction series
▪ Legacy Q-Gun series
▪ Legacy S-Gun series
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD 22 Series Air Cooled Nozzles for Classic No. 2, Spray Master 250, and Smoke Master 250 MIG guns are self insulated and compatible with HD52 Series Gas Diffusers.
Compatible with Tweco MIG guns:
- Classic No. 2
- Spray master 250
- Smoke Master 250
Features:
- Used in heavy duty welding application up to 250 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allows and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- 3-piece design – does not require an additional insulator
Specifications:
- Inside Diameter: 1/2″
- Style: Slip-On
- Nozzle/Contact Tip Relationship: 1/8″ – 5/32″ Tip recess
- Outside Diameter: .875″
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard Model N1C12Q Quik Tip series 1 with 1/2″ bore, plated copper; threaded nozzle.
Nozzle is compatible with:
BTB series
Clean Air Series
Dura-Flex
Fixed Liner Series
FILTAIR Fume Extraction series
Legacy Q-Gun series
Legacy S-Gun series
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds 21-62 Self-Insulated MIG Gun Nozzles
Best Welds Tweco style 21 Series 5/8” self-insulated MIG gun nozzles with 1/8” recess.
- Used in light to medium duty welding application up to 180 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut and Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allow and machining the internal threads to match the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- Tapered nozzle 3-piece design – does not require an additional insulator
- Nozzle threads onto the gas diffuser
Nozzle is compatible with:
▪ Tweco Mini
▪ Tweco No 1
▪ Best Welds 135
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America 1/2″ X 1″ Cylindrical End Cut Carbide Burr
Drill America SB-5DC Carbide Burr
Drill America 1/2” X 1” Cylindrical End Cut Carbide Burr 1/4 Shank
Specifications:
▪ Size: 1/2”
▪ Material: Carbide
▪ Finish: Uncoated (Bright)
▪ Cutting Length: 1”
▪ Shank Size: 1/4”
▪ Cutting Direction: Right Hand
▪ Style: Cylindrical, End-Cut Double Cut
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America 3/8″ X 3/4″ Cylindrical End Cut Carbide Burr
Drill America cylindrical end cut carbide bur ¼”
Thermal Dynamics 50-60 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamics 50-60 Amp Drag Shield Cap For SL60/100 Plasma Torch
ESAB 80 Amp Tip For Plasmarc PT-27 Plasma Torch
ESAB 80 Amp Tip For Plasmarc PT-27 Plasma Torch
ESAB 50 Amp Nozzle For Plasmarc PT-23/27 Plasma Torch
ESAB 50 Amp Nozzle For Plasmarc PT-23/27 Plasma Torch
Miller Nozzle Adapter for M-25, 40 Guns
Miller Nozzle Adapter for M-25, 40 Guns
Miller Nozzle Adapter
Nozzle is compatible with:
· MIGMatic
· M-15
· Hobart H series
Lincoln Nozzle 1/8″ X 5/8″ 550A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 5/8″ 550A Thread-on for Magnum Pro
Lincoln Electric 1/8″ Thread-On Recess Gas Nozzle with 5/8″ ID is designed for Magnum® PRO 350 » Magnum® PRO 550. Standard gas nozzle is ideal for 550 A welding applications.