Shop
Showing all 19 results
3M Particulate Filter 7000(AAD), P100 2PK
3M Particulate Filter 7000(AAD), P100 2PK
- Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
- Versatile protection against many oil and non-oil based particulate contaminants
- Bayonet compatibility allows use with many 3M™ half and full facepiece designs
- Wide range of applications reduces inventory needs and training requirements
NIOSH approved for environments containing certain oil and non-oil based particles.
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
The filter works with a wide range of facepieces, including 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M™ Adapter 502, the filter may also be used with 3M™ Respirator 5000 Series or 3M™ Cartridge 6000 Series. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain oil and non-oil based particles. The filter has been assigned the color code “magenta” in the NIOSH system. Passing NIOSH’s P-series test criteria, the 2091 P100 filter provides at least 99.97 percent filter efficiency against particles.
Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 2091 to help reduce exposure to certain particles.
3M 8511 Particulate Respirator N95
3M 8511 Particulate Respirator N95
- NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
- 3M™ Cool Flow™ Exhalation Valve helps reduce heat build-up inside the respirator
- M-Noseclip adjusts easily for fewer pressure points and greater comfort.
- Braided headbands two-strap design with dual point attachment helps provide a secure seal
- 3M Cool Flow Exhalation Valve reduces heat build-up inside the respirator
- Spacious and durable
- Designed to increase comfort and wearability
- Advanced Electret Media is designed for ease of breathing
This disposable N95 particulate respirator features the proprietary 3M™ Cool Flow™ Valve and helps provide comfortable, reliable worker respiratory protection. It is ideally suited for hot/dusty work settings that require long periods of wear.
3M™ Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-noseclip helps provide a custom and secure seal. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers. The Cool Flow valve’s efficiency in keeping breathing cool and comfortable has been demonstrated through testing*: the atmosphere inside a respirator with a Cool Flow valve is on average 7.5°F cooler than the similar product without the valve. This makes Cool Flow valve respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding. *Testing conducted in a 3M laboratory. Testing protocol, data generation and conclusions were reviewed and approved by an expert from The University of Minnesota
Miller P100 Filters for LPR-100 Half Mask Repsirator
Miller P100 Filters for LPR-100 Half Mask Repsirator
3M 8210V Particulate Respirator N95
3M 8210V Particulate Respirator N95
- Proprietary 3M™ Cool Flow™ Valve helps keeps wearer cool
- Cushioning nose foam
- Adjustable noseclip helps provide a custom and secure seal
- Advanced electrostatic media is designed for ease of breathing
- Compatible with a variety of protective eyewear and hearing protection
This disposable N95 particulate respirator featuring 3M™ Cool Flow™ Valve helps provide comfortable, reliable worker respiratory protection against certain non-oil based particles. Ideally suited for hot/dusty work settings or long periods of wear.
The lightweight, disposable N95 particulate dust respirator is designed to help provide quality, reliable worker respiratory protection. 3M uses a variety of innovative features to help you meet your respiratory protection and comfort needs. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media. The proprietary 3M™ Cool Flow™ Exhalation Valve reduces heat build-up inside the respirator to help keep the wearer more comfortable. Its adjustable noseclip and cushioning nose foam help provide a custom and secure seal. These features help promote greater worker acceptance and may help increase wear time. * N95 approved filtering facepiece particulate respirator * 3M™ Cool Flow™ Exhalation Valve * Compatible with a variety of protective eyewear and hearing protection. * Adjustable noseclip helps provide a custom and secure seal * Two-strap design with stapled dual point attachment helps provide a secure fit. * Suggested applications: Grinding, Sanding, Sweeping, Bagging and other dusty operations. * Can also be used to help reduce inhalation of certain airborne biological particles like mold, Bacillus anthracis, Mycobacterium tuberculosis, etc. Example applications include emergency or pandemic preparedness planning, stockpiling, etc. WARNING: These disposable N95 particulate respirators help reduce exposure to certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as part of the product packaging. Time use limitations may apply. For proper use, see package instructions, your supervisor or call 3M OH&ESD Technical Service in U.S.A. 1-800-243-4630. In Canada, call 1-800-267-4414.
3M Particulate Respirator N95, with Faceseal and Nuisance Level Organic Vapor Relief
3M Particulate Respirator N95, with Faceseal and Nuisance Level Organic Vapor Relief
Details
· Used in applications involving metal fumes
· Carbon filter media reduces exposure to ozone/nuisance level of organic vapors
· Flame resistant per modified ASTM D2859 (not a substitute for a faceshield)
· Comfortable foam faceseal/fully adjustable straps
· 3M™ Cool Flow© Valve helps keep wearer cool
This disposable N95 particulate welding respirator with carbon layer helps provide respiratory protection where metal fumes may be present including those with ozone* and nuisance level organic vapors**. Features foam faceseal and 3M™ Cool Flow© Valve.
The lightweight, disposable N95 particulate respirator is designed to help provide respiratory protection for certain non-oil particles in applications such as welding, soldering and other operations in which metal fumes may be present. 3M uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs. The specially designed cake-resistant filter media provides longer respirator life. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media, designed for ease of breathing. The proprietary 3M™ Cool Flow© Exhalation Valve reduces heat build up inside the respirator to help keep the wearer more comfortable. These combined features, along with the foam face seal and fully adjustable straps are designed to help enhance user comfort and increase wearability. -N95 Approved filtering facepiece particulate respirator – 3M™ Cool Flow© Exhalation Valve – Comfortable foam face seal – Cake-resistant filter media – Flame resistant as demonstrated per modified ASTM D2859 (not a substitute for a faceshield) – Carbon filter material for ozone* and nuisance level organic vapors** – Compatible with a variety of protective eyewear and hearing protection – Adjustable noseclip helps provide a custom and secure seal – Fully adjustable headstraps help provide a secure fit – Suggested applications: Welding, torch cutting, brazing, soldering, metal pouring, working with stainless, galvanized or aluminum * 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone. ** 3M recommended for relief against nuisance levels of organic vapors. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
Dewalt 14″ X 1/8″ X 20mm Cut-off wheel
DeWalt DW8021R3 High Speed Cutting Wheel
The DeWalt High Speed Cutting Wheels are made with high-performance aluminum oxide grain that offers increased life and superior material removal, DEWALT Type 1 HP Metal Cutting High Speed Wheels feature 2 full sheets of thick fiberglass for strength and safety. A high grain concentration enables aggressive cutting action and smooth-running wheels.
Specifications:
▪ Arbor: 20
▪ Diameter: 14
▪ Grain: Aluminum Oxide
▪ Application: Ductile Pipe
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 64502 Chopsaw Wheel
The Pferd Performance Line SG – Elastic chop saw wheels feature premium aluminum oxide grain and a strong center reinforcement layer for fast, free cutting action and long service life. These wheel provide excellent cutting results on machines with up to 5 horsepower output.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material., rebar, tubing, and other small cross sections
• Diameter: 14 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 1” A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 4,400
3M Organic Vapor Cartridge/Filter P100
3M Organic Vapor Cartridge/Filter P100
3M Organic Vapor Cartridges/P100 Particulate Filters 6000 Series
· NIOSH approved for protection against certain organic vapors and particulates
· Swept-back design allows an enhanced field of view and comfort
· Bayonet compatibility allows use with many 3M half and full facepiece designs
· Wide range of applications reduces inventory needs
· Simple installation and usage requirements reduce training needs
NIOSH approved against certain organic vapors and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
The 3M™ Organic Vapor Cartridge/Filter 60921 P100 helps provide protection against certain organic vapors and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticide application. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
This organic vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/Black”
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 42514 Quick Change Disc
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Aluminum Oxide A:
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
Moldex N95 Series Particulate Respirator with Exhale Valve
Moldex N95 Series Particulate Respirator with Exhale Valve
2300N95 Series Particulate Respirators With Exhale Valve
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
· 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure
· PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes
· Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling
· Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys
3M™ Cubitron© II Fibre Disc 987C offers significant gains in productivity on medium to heavy-duty operations with our exceptionally high-performing 3M Precision Shaped Grain combined with a stiff fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other fiber discs””all with less grinding pressure.
3M™ Cubitron© II Fibre Disc 987C is suitable for use on almost all metals and excels in stainless steel and other nickel alloy applications. It is ideal for weld removal, beveling, removing mill scale, pits and imperfections, and more. Because 3M Precision Shaped Grain generates an exceptionally high cut-rate with less pressure, operators can finish tough tasks faster and with less fatigue. A grinding aid incorporated on the disc makes this an outstanding product for all types of metal””it helps keep the disc cooler on stainless steel and heat-sensitive metals such as nickel alloys and titanium, thereby reducing metal discoloration/oxidation and the chance of heat-related stress cracks. Moreover, because the abrasive itself stays cooler and sharper, our 3M Precision Shaped Grain discs last significantly longer than conventional ceramic grain discs, delivering a lower cost per grind with fewer disc changes.
Our 3M™ Cubitron© II products have raised the bar for high-performing abrasives. 3M Precision Shaped Grain outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.
To create 3M Precision Shaped Grain, our engineers started with 3M™ Ceramic Abrasive Grain and used proprietary technology to form the grains into triangular structures and electrostatically orient them on the backing to form sharp peaks that maximize cutting potential. These peaks slice cleanly through metal, rather than gouging or plowing as traditional abrasives do, and continuously self-sharpen as the points break off. This generates a super-fast cut and lessens heat build-up due to friction, reducing heat-related stress cracks and discoloration.
3M Precision Shaped Grain also wears evenly, and because the abrasive itself stays cooler and sharper, 3M™ Cubitron© II products last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications.
Fiber discs are heavy-duty discs ideal for weld removal, grinding, and blending large and small areas of metal surfaces. They feature a tough, stiff backing made from vulcanized fiber that resist wear and can handle tough grinding applications.
Specifications | |
Abrasive Material | Precision Shaped Ceramic Grain |
Abrasive Trade Name | Cubitron II |
Applicable Materials | Cobalt & Nickel Alloy, Stainless Steel, Titanium |
Applications | Grinding; Metal Stock Removal |
Body Material | Fiber |
Bond | Resin |
Brand | 3M ABRASIVE |
Color | Orange |
Dia. [Nom] | 4 1/2 in |
Grit | 60 |
Mounting | Threaded Hole |
Speed [Max] | 13,300 rpm |
Style | 987C |
Type | Fibre Disc |
Used With | Right Angle Grinder |
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: |
7″ |
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: | 4-1/2″ |
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 42520 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 120
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 42518 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 80
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 42517 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 60
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 14″ X 3/16″ Cut-off Wheel 20mm Ah
Pferd 14″ X 3/16″ Cut-off Wheel 20mm Ah
Pferd 64016 Cut-Off Wheel for Portable Saws
The Pferd Performance Line SG – Elastic large diameter cut-off wheels for portable saws offer market leading performance. Manufactured with a combination of heavy reinforcement and a high concentration of premium abrasive grain, they are the preferred brand for professional contractors, demolition personnel, rescue personnel and municipalities.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material
• Diameter: 14 Inches
• Thickness: 3/16 Inches
• Arbor Hole/Thread Size: 20 mm A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 5,500