Shop
Showing 1–20 of 26 results
J.W. Harris Stay Clean Paste Flux – 4oz
J.W. Harris Stay Clean Paste Flux – 4oz
Stay-Clean Paste Soldering Flux is designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean Paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.
Specifications:
Package Size |
4 oz. Bottle |
J.W. Harris Solar Flux Type B 1# Can
J.W. Harris Solar Flux Type B 1# Can
Solar Flux is a complex chemical compound in the form of a very fine powder. Solar Flux is mixed with alcohol (methanol/methyl alcohol preferred) and brushed on the weld joint. It is formulated to shield the back of the weld joint from oxygen, dissipate heat and unwanted oxides, and to clean the surface of the metal. It will aid in the flow of filler metal over base metal and form a protective barrier to prevent re-oxidation and heat scale.
Type B for stainless steel, (except 309, 310), precipitation hardening steels, chrome-moly steels, other alloy steels with nickel content below 25%
Specifications:
Package Size | 1 lb Can |
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 64502 Chopsaw Wheel
The Pferd Performance Line SG – Elastic chop saw wheels feature premium aluminum oxide grain and a strong center reinforcement layer for fast, free cutting action and long service life. These wheel provide excellent cutting results on machines with up to 5 horsepower output.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material., rebar, tubing, and other small cross sections
• Diameter: 14 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 1” A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 4,400
J.W. Harris Stay Clean Aluminum Flux
J.W. Harris Stay Clean Aluminum Flux
The Harris Stay-Clean Aluminum Flux is a liquid flux for use with aluminum soldering. Use with Al-Solder 500. Works to join aluminum to dissimilar metals.
Typical Application: Recommended for soldering aluminum and aluminum to other metals.
Size: 4 oz Bottle
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Alumina Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: .035 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 25,000
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63103 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
▪ Abrasive: Aluminum Oxide
▪ Workpiece Materials: Steel, Cast Iron
▪ Application: Cutting of sections and solid material
▪ Diameter: 4 1/2 Inches
▪ Thickness: 3/32 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 46
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 4-1/2″ X .040 Cut-off Wheel 7/8″Ah 60 Grit – Type 1
Pferd 4-1/2″ X .040 Cut-off Wheel 7/8″Ah 60 Grit – Type 1
Pferd 69945 Cut-Off Wheel
The Pferd Universal PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 4 1/2 Inches
• Thickness: .040 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69865 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63105 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
• Abrasive: Aluminum Oxide
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting of sections and solid material
• Diameter: 5 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 12,200
Weiler Tiger Type 1 Wheel Mounting Mandrel for Cut Off Wheels
Weiler Tiger Type 1 Wheel Mounting Mandrel for Cut Off Wheels
Weiler 840-56490 Tiger Type 1 Mandrel
This Weiler steel mandrel is for mounting type 1 flat cut-off wheels with 3/8” arbor holes. Suitable for 1”-3” wheels only.
Specifications:
▪ Arbor: 3/5”
▪ Length: 4”
▪ Shank Diameter: ¼”
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 11-T-142 Zip Cut-Off Wheel
Faster, cooler, freer cutting and heavily reinforced for added safety, zip-wheel provides premium performance while resisting twisting and bending. This allows for a true, straight cut every time. The end result is a wheel that improves worker safety while delivering the lowest cost-per-cut in the industry.
• Abrasive: Aluminm Oxide
• Workpiece Materials: Steel, Cast Iron, Stainless Steel, Sheet Metal
• Diameter: 4 1/2 Inches
• Thickness: 3/64 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69964 Cut-Off Wheel
The Pferd Unversial PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200
Pferd 5″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 5″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69954 Cut-Off Wheel
The Pferd Unversial PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 5 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 12,200
Pferd 4-1/2″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 4-1/2″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69846 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 4 1/2 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 13,300
Pferd 3″ X 1/16″ Die Grinder Wheel 3/8″Ah 36 Grit – Type 1
Pferd 3″ X 1/16″ Die Grinder Wheel 3/8″Ah 36 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: 1/16 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 25,000
Pferd 14″ X 3/16″ Cut-off Wheel 20mm Ah
Pferd 14″ X 3/16″ Cut-off Wheel 20mm Ah
Pferd 64016 Cut-Off Wheel for Portable Saws
The Pferd Performance Line SG – Elastic large diameter cut-off wheels for portable saws offer market leading performance. Manufactured with a combination of heavy reinforcement and a high concentration of premium abrasive grain, they are the preferred brand for professional contractors, demolition personnel, rescue personnel and municipalities.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material
• Diameter: 14 Inches
• Thickness: 3/16 Inches
• Arbor Hole/Thread Size: 20 mm A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 5,500
Pferd 4-1/2″ X .045 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 4-1/2″ X .045 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 63607 Cut-Off Wheel
The Pferd Performance Line SG – Elastic cut-off wheels are global leaders in quality, consistency, and performance. These are premium, long-life cut-off wheels for stainless steel and high temperature alloys. They are designed for smooth, fast cutting action with minimal contact pressure.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, High Temperature Alloys, Carbon Steel, All Ferrous Metals
• Application: Cutting of sections and solid material
• Diameter: 4 1/2 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 13,300
Pferd 4-1/2″ X .040 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 4-1/2″ X .040 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 63576 Cut-Off Wheel
The Pferd Performance Line SG – Elastic cut-off wheels are global leaders in quality, consistency, and performance. These are premium, long-life cut-off wheels for stainless steel and high temperature alloys. They are designed for smooth, fast cutting action with minimal contact pressure.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, High Temperature Alloys, Carbon Steel, All Ferrous Metals
• Application: Cutting of sections and solid material
• Diameter: 4 1/2 Inches
• Thickness: .040 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 13,300
Pferd 9″ X 3/32″ Cut-off Wheel, 5/8-11 Thd – Type 27
Pferd 9″ X 3/32″ Cut-off Wheel, 5/8-11 Thd – Type 27
Pferd 63242 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
▪ Abrasive: Aluminum Oxide A
▪ Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
▪ Application: Cutting of sheet metal, sections and solid material
▪ Diameter: 9 Inches
▪ Thickness: 3/32 Inches
▪ Arbor Hole/Thread Size: 5/8 – 11 Thread
▪ Grit: 24
▪ Shape: Depressed Center
▪ Max RPM: 6,600
Pferd 6″ X .045 Cut-off Wheel 5/8-11 Thd – Type 27
Pferd 6″ X .045 Cut-off Wheel 5/8-11 Thd – Type 27
Pferd 63184 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting of sections and solid material
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 5/8 – 11 Thread
• Grit: 46
• Shape: Depressed Center
• Max RPM: 10,200