Shop
Showing 1–20 of 41 results
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor (Regulator Set)
Weldmark Flashback Arrestor Regulator Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 64502 Chopsaw Wheel
The Pferd Performance Line SG – Elastic chop saw wheels feature premium aluminum oxide grain and a strong center reinforcement layer for fast, free cutting action and long service life. These wheel provide excellent cutting results on machines with up to 5 horsepower output.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material., rebar, tubing, and other small cross sections
• Diameter: 14 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 1” A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 4,400
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Alumina Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: .035 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 25,000
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63103 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
▪ Abrasive: Aluminum Oxide
▪ Workpiece Materials: Steel, Cast Iron
▪ Application: Cutting of sections and solid material
▪ Diameter: 4 1/2 Inches
▪ Thickness: 3/32 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 46
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor (Torch Set)
Weldmark Flashback Arrestor Torch Set
- Built in check valve presents reverse flow
- Fits all 9/16’ – 18” “B” size regulators & torches
- 100% factory flame & leak tested
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
Pferd 4-1/2″ X .040 Cut-off Wheel 7/8″Ah 60 Grit – Type 1
Pferd 4-1/2″ X .040 Cut-off Wheel 7/8″Ah 60 Grit – Type 1
Pferd 69945 Cut-Off Wheel
The Pferd Universal PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 4 1/2 Inches
• Thickness: .040 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69865 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63105 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
• Abrasive: Aluminum Oxide
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting of sections and solid material
• Diameter: 5 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 12,200
Valved “Y” Connections, 200 PSIG, Brass, Female/Male, RH, 9/16″ – 18
Valved “Y” Connections, 200 PSIG, Brass, Female/Male, RH, 9/16″ – 18
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
TWECO Fluxcored SEFC MIG Gun
350 AMP 60% Duty cycle MIG gun with Lincoln Style rear connectors. Suitable for medium/heavy duty fabrication
Features:
- For use with all gasless wires
- High Impact-Resistant One-Piece “Straight” Handle
- Metal “Paddle” style trigger lever
- Micro-Switch Trigger Design incorporates a button style switch for start/stop wire feed
- Spare Trigger Leads in Cablehoz
- Heavy Duty design and front-end consumables
- Rugged & Duraable power Cablehoz with proven abrasion & heat ressitance
Specifications:
- Amps: 350 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: 3/32″
- Connector: Lincoln Style fits LN 7, 8, 9 , SP200
- Gas: Carbon Dioxide
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Semiautomatic Gas-Shielded Guns
Magnum® guns for MIG or flux-cored welding feature our classic curved handle and are available in a number of amperage ranges for use in many applications.
Top Features
· Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto body work and light maintenance or repair applications. Includes gun connector.
· One-piece modular trigger assembly – Molded out of high heat resistant material to withstand head and spatter and ensure long life.
· Gun tube design – Armored with an electrically insulated metal jacket optimizing fine wire welding performance.
· Abrasion-resistant, extruded rubber jacket – Adds strength and long life to the cable.
· Classic curved handle – Lightweight and balanced, providing a comfortable grip to reduce fatigue.
Processes
Flux-Core Gas Shielded
Wire Diameter Range
.025-.045 in. (0.6-1.2 mm)
What’s Included
· Contact Tip
· Gas Diffuser
· Gas Nozzle
· Insulator
· Cable Liner
· Gun Tube (60°)