Shop
Showing 1–20 of 28 results
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 14″ X 3/32″ X 1″ Chop Saw Steel
Pferd 64502 Chopsaw Wheel
The Pferd Performance Line SG – Elastic chop saw wheels feature premium aluminum oxide grain and a strong center reinforcement layer for fast, free cutting action and long service life. These wheel provide excellent cutting results on machines with up to 5 horsepower output.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material., rebar, tubing, and other small cross sections
• Diameter: 14 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 1” A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 4,400
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 3″ X .035 Die Grinder Wheel 3/8″Ah 60 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Alumina Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: .035 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 25,000
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 4-1/2″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63103 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
▪ Abrasive: Aluminum Oxide
▪ Workpiece Materials: Steel, Cast Iron
▪ Application: Cutting of sections and solid material
▪ Diameter: 4 1/2 Inches
▪ Thickness: 3/32 Inches
▪ Arbor Hole/Thread Size: 7/8 A.H.
▪ Grit: 46
▪ Shape: Depressed Center
▪ Max RPM: 13,300
Pferd 4-1/2″ X .040 Cut-off Wheel 7/8″Ah 60 Grit – Type 1
Pferd 4-1/2″ X .040 Cut-off Wheel 7/8″Ah 60 Grit – Type 1
Pferd 69945 Cut-Off Wheel
The Pferd Universal PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 4 1/2 Inches
• Thickness: .040 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 13,300
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69865 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 5″ X 3/32″ Cut-off wheel, 7/8″Ah – Type 27
Pferd 63105 Cut-Off Wheel
The Pferd best-selling Performance Ling SG-Elastic cut-off wheels for steel are globally recognized for their fast, free cutting performance and excellent service life. These wheels are recommended for professionals cutting steel and cast iron.
Specifications:
• Abrasive: Aluminum Oxide
• Workpiece Materials: Steel, Cast Iron
• Application: Cutting of sections and solid material
• Diameter: 5 Inches
• Thickness: 3/32 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 24
• Shape: Depressed Center
• Max RPM: 12,200
ESAB Coreshield 11 E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire 1/16″ 33# Spool
ESAB Coreshield 11 E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire 1/16″ 33# Spool
Lincoln Innershield NR-212 E71TG-G Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-212 E71TG-G Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-211-MP E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-211-MP E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire
Weiler Tiger Type 1 Wheel Mounting Mandrel for Cut Off Wheels
Weiler Tiger Type 1 Wheel Mounting Mandrel for Cut Off Wheels
Weiler 840-56490 Tiger Type 1 Mandrel
This Weiler steel mandrel is for mounting type 1 flat cut-off wheels with 3/8” arbor holes. Suitable for 1”-3” wheels only.
Specifications:
▪ Arbor: 3/5”
▪ Length: 4”
▪ Shank Diameter: ¼”
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 4-1/2″ X 3/64″ Zip Cut-off Wheel
Walter 11-T-142 Zip Cut-Off Wheel
Faster, cooler, freer cutting and heavily reinforced for added safety, zip-wheel provides premium performance while resisting twisting and bending. This allows for a true, straight cut every time. The end result is a wheel that improves worker safety while delivering the lowest cost-per-cut in the industry.
• Abrasive: Aluminm Oxide
• Workpiece Materials: Steel, Cast Iron, Stainless Steel, Sheet Metal
• Diameter: 4 1/2 Inches
• Thickness: 3/64 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Depressed Center
• Max RPM: 13,300
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 6″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69964 Cut-Off Wheel
The Pferd Unversial PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 6 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 10,200
Pferd 5″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 5″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69954 Cut-Off Wheel
The Pferd Unversial PSF cut-off wheels are general purpose wheels providing fast cutting performance and good service life.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid materials
• Diameter: 5 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 12,200
Pferd 4-1/2″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 4-1/2″ X .045 Cut-off Wheel 7/8″Ah 46 Grit – Type 1
Pferd 69846 Cut-Off Wheel
The Pferd Special Line SG-Plus cut-off wheels are engineered for maximum productivity in high volume cutting environments.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, Carbon Steel, All Ferrous Metals
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 4 1/2 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 13,300
Pferd 3″ X 1/16″ Die Grinder Wheel 3/8″Ah 36 Grit – Type 1
Pferd 3″ X 1/16″ Die Grinder Wheel 3/8″Ah 36 Grit – Type 1
Pferd 69303 Die Grinder Wheel
The Pferd Universal Line PSF wheels are a general purpose cut-off wheels for use on die grinders. They are fully reinforced and ideal for working hard-to-reach areas or close quarters.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sheet metal, sections and solid material
• Diameter: 3 Inches
• Thickness: 1/16 Inches
• Arbor Hole/Thread Size: 3/8 A.H.
• Grit: 36
• Shape: Flat
• Max RPM: 25,000
Pferd 14″ X 3/16″ Cut-off Wheel 20mm Ah
Pferd 14″ X 3/16″ Cut-off Wheel 20mm Ah
Pferd 64016 Cut-Off Wheel for Portable Saws
The Pferd Performance Line SG – Elastic large diameter cut-off wheels for portable saws offer market leading performance. Manufactured with a combination of heavy reinforcement and a high concentration of premium abrasive grain, they are the preferred brand for professional contractors, demolition personnel, rescue personnel and municipalities.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Steel
• Application: Cutting of sections and solid material
• Diameter: 14 Inches
• Thickness: 3/16 Inches
• Arbor Hole/Thread Size: 20 mm A.H.
• Grit: 24
• Shape: Flat
• Max RPM: 5,500
Pferd 4-1/2″ X .045 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 4-1/2″ X .045 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 63607 Cut-Off Wheel
The Pferd Performance Line SG – Elastic cut-off wheels are global leaders in quality, consistency, and performance. These are premium, long-life cut-off wheels for stainless steel and high temperature alloys. They are designed for smooth, fast cutting action with minimal contact pressure.
Specifications:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, High Temperature Alloys, Carbon Steel, All Ferrous Metals
• Application: Cutting of sections and solid material
• Diameter: 4 1/2 Inches
• Thickness: .045 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 46
• Shape: Flat
• Max RPM: 13,300
Pferd 4-1/2″ X .040 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 4-1/2″ X .040 Cut-off Wheel, 7/8″Ah – Type 1
Pferd 63576 Cut-Off Wheel
The Pferd Performance Line SG – Elastic cut-off wheels are global leaders in quality, consistency, and performance. These are premium, long-life cut-off wheels for stainless steel and high temperature alloys. They are designed for smooth, fast cutting action with minimal contact pressure.
Specification:
• Abrasive: Aluminum Oxide A
• Workpiece Materials: Stainless Steel, High Temperature Alloys, Carbon Steel, All Ferrous Metals
• Application: Cutting of sections and solid material
• Diameter: 4 1/2 Inches
• Thickness: .040 Inches
• Arbor Hole/Thread Size: 7/8 A.H.
• Grit: 60
• Shape: Flat
• Max RPM: 13,300