Shop
Showing 1–20 of 22 results
3M Particulate Filter 7000(AAD), P100 2PK
3M Particulate Filter 7000(AAD), P100 2PK
- Exceptional 99.97% filter efficiency meets NIOSH P100-series test criteria
- Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
- Versatile protection against many oil and non-oil based particulate contaminants
- Bayonet compatibility allows use with many 3M™ half and full facepiece designs
- Wide range of applications reduces inventory needs and training requirements
NIOSH approved for environments containing certain oil and non-oil based particles.
The 3M™ Particulate Filter 2091, P100 helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic, and MDA. The filter is effective for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces, or 50 times PEL with quantitatively fit tested full facepieces. This filter helps protect against a wide range of oil and non-oil based particulate contaminants. 3M’s Advanced Electret Media (AEM) provides a comfortable lightweight, easy-breathing combination. The 2091 is commonly used for welding, brazing, torch cutting, metal pouring and soldering. Inventory needs and training requirements of safety equipment are reduced because this filter works for many different applications. The filter is both flame and water resistant. Industries where this filter is commonly used include agriculture, construction, general manufacturing, pharmaceuticals and primary metals.
The filter works with a wide range of facepieces, including 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series. If used with 3M™ Adapter 502, the filter may also be used with 3M™ Respirator 5000 Series or 3M™ Cartridge 6000 Series. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain oil and non-oil based particles. The filter has been assigned the color code “magenta” in the NIOSH system. Passing NIOSH’s P-series test criteria, the 2091 P100 filter provides at least 99.97 percent filter efficiency against particles.
Breathing hazardous particles can pose a risk to your health. NIOSH, a Federal government regulatory agency, has tested and approved the 3M™ Particulate Filter 2091 to help reduce exposure to certain particles.
3M 8511 Particulate Respirator N95
3M 8511 Particulate Respirator N95
- NIOSH approved for at least 95 percent filtration efficiency against certain non-oil based particles
- 3M™ Cool Flow™ Exhalation Valve helps reduce heat build-up inside the respirator
- M-Noseclip adjusts easily for fewer pressure points and greater comfort.
- Braided headbands two-strap design with dual point attachment helps provide a secure seal
- 3M Cool Flow Exhalation Valve reduces heat build-up inside the respirator
- Spacious and durable
- Designed to increase comfort and wearability
- Advanced Electret Media is designed for ease of breathing
This disposable N95 particulate respirator features the proprietary 3M™ Cool Flow™ Valve and helps provide comfortable, reliable worker respiratory protection. It is ideally suited for hot/dusty work settings that require long periods of wear.
3M™ Particulate Respirator 8511, N95 is a disposable particulate respirator that is designed to help provide reliable respiratory protection of at least 95 percent filtration efficiency against certain non-oil based particles. The respirator is designed for use for particles such as those from grinding, sanding, sweeping, sawing, bagging, or other dusty operations. This respirator can also help reduce inhalation exposures to certain airborne biological particles (examples: mold, Bacillus anthracis, Mycobacterium tuberculosis), but cannot eliminate the risk of contracting infection, illness, or disease. Soft inner material provides added comfort while the cup shape design makes the respirator spacious and durable. Braided headbands and an adjustable M-noseclip helps provide a custom and secure seal. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media designed for ease of breathing. This respirator is compatible with a variety of protective eyewear and hearing protection. Fitted with a 3M Cool Flow™ Exhalation Valve, this respirator is ideally suited for work situations involving heat, humidity, or long periods of wear. The proprietary 3M Cool Flow valve is designed to release hot, humid exhaled breath quickly, helping to prevent an unpleasant build up of heat inside the facepiece – a significant cause of discomfort to respirator wearers. The Cool Flow valve’s efficiency in keeping breathing cool and comfortable has been demonstrated through testing*: the atmosphere inside a respirator with a Cool Flow valve is on average 7.5°F cooler than the similar product without the valve. This makes Cool Flow valve respirators ideal for long periods of wear, especially where conditions are hot, humid or physically demanding. *Testing conducted in a 3M laboratory. Testing protocol, data generation and conclusions were reviewed and approved by an expert from The University of Minnesota
Miller P100 Filters for LPR-100 Half Mask Repsirator
Miller P100 Filters for LPR-100 Half Mask Repsirator
3M 8210V Particulate Respirator N95
3M 8210V Particulate Respirator N95
- Proprietary 3M™ Cool Flow™ Valve helps keeps wearer cool
- Cushioning nose foam
- Adjustable noseclip helps provide a custom and secure seal
- Advanced electrostatic media is designed for ease of breathing
- Compatible with a variety of protective eyewear and hearing protection
This disposable N95 particulate respirator featuring 3M™ Cool Flow™ Valve helps provide comfortable, reliable worker respiratory protection against certain non-oil based particles. Ideally suited for hot/dusty work settings or long periods of wear.
The lightweight, disposable N95 particulate dust respirator is designed to help provide quality, reliable worker respiratory protection. 3M uses a variety of innovative features to help you meet your respiratory protection and comfort needs. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media. The proprietary 3M™ Cool Flow™ Exhalation Valve reduces heat build-up inside the respirator to help keep the wearer more comfortable. Its adjustable noseclip and cushioning nose foam help provide a custom and secure seal. These features help promote greater worker acceptance and may help increase wear time. * N95 approved filtering facepiece particulate respirator * 3M™ Cool Flow™ Exhalation Valve * Compatible with a variety of protective eyewear and hearing protection. * Adjustable noseclip helps provide a custom and secure seal * Two-strap design with stapled dual point attachment helps provide a secure fit. * Suggested applications: Grinding, Sanding, Sweeping, Bagging and other dusty operations. * Can also be used to help reduce inhalation of certain airborne biological particles like mold, Bacillus anthracis, Mycobacterium tuberculosis, etc. Example applications include emergency or pandemic preparedness planning, stockpiling, etc. WARNING: These disposable N95 particulate respirators help reduce exposure to certain airborne contaminants. Misuse may result in sickness or death. Before use, the wearer must read and understand User Instructions provided as part of the product packaging. Time use limitations may apply. For proper use, see package instructions, your supervisor or call 3M OH&ESD Technical Service in U.S.A. 1-800-243-4630. In Canada, call 1-800-267-4414.
3M Particulate Respirator N95, with Faceseal and Nuisance Level Organic Vapor Relief
3M Particulate Respirator N95, with Faceseal and Nuisance Level Organic Vapor Relief
Details
· Used in applications involving metal fumes
· Carbon filter media reduces exposure to ozone/nuisance level of organic vapors
· Flame resistant per modified ASTM D2859 (not a substitute for a faceshield)
· Comfortable foam faceseal/fully adjustable straps
· 3M™ Cool Flow© Valve helps keep wearer cool
This disposable N95 particulate welding respirator with carbon layer helps provide respiratory protection where metal fumes may be present including those with ozone* and nuisance level organic vapors**. Features foam faceseal and 3M™ Cool Flow© Valve.
The lightweight, disposable N95 particulate respirator is designed to help provide respiratory protection for certain non-oil particles in applications such as welding, soldering and other operations in which metal fumes may be present. 3M uses a variety of innovative technologies and features to help you meet your respiratory protection and comfort needs. The specially designed cake-resistant filter media provides longer respirator life. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media, designed for ease of breathing. The proprietary 3M™ Cool Flow© Exhalation Valve reduces heat build up inside the respirator to help keep the wearer more comfortable. These combined features, along with the foam face seal and fully adjustable straps are designed to help enhance user comfort and increase wearability. -N95 Approved filtering facepiece particulate respirator – 3M™ Cool Flow© Exhalation Valve – Comfortable foam face seal – Cake-resistant filter media – Flame resistant as demonstrated per modified ASTM D2859 (not a substitute for a faceshield) – Carbon filter material for ozone* and nuisance level organic vapors** – Compatible with a variety of protective eyewear and hearing protection – Adjustable noseclip helps provide a custom and secure seal – Fully adjustable headstraps help provide a secure fit – Suggested applications: Welding, torch cutting, brazing, soldering, metal pouring, working with stainless, galvanized or aluminum * 3M recommended for ozone protection up to 10 times the OSHA PEL or applicable government occupational exposure limits, whichever is lower. Not NIOSH approved for use against ozone. ** 3M recommended for relief against nuisance levels of organic vapors. Nuisance level refers to concentrations not exceeding OSHA PEL or applicable government occupational exposure limits, whichever is lower.
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
3M Organic Vapor Cartridge/Filter P100
3M Organic Vapor Cartridge/Filter P100
3M Organic Vapor Cartridges/P100 Particulate Filters 6000 Series
· NIOSH approved for protection against certain organic vapors and particulates
· Swept-back design allows an enhanced field of view and comfort
· Bayonet compatibility allows use with many 3M half and full facepiece designs
· Wide range of applications reduces inventory needs
· Simple installation and usage requirements reduce training needs
NIOSH approved against certain organic vapors and particulates. Use with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet filter holders.
The 3M™ Organic Vapor Cartridge/Filter 60921 P100 helps provide protection against certain organic vapors and particulates in a variety of environments. The cartridge/filter combination may be used for respiratory protection from certain organic vapors and non-oil and oil particulate concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with quantitatively fit tested full facepieces. This cartridge/filter is not for use in environments that are immediately dangerous to life or health (IDLH). Recommended applications for the cartridge/filter include chemical clean-up, chemical compounding, chemical transfer, laboratories, and pesticide application. Inventory needs and training requirements for safety equipment are reduced because this respirator cartridge selection works for many different applications. This cartridge/filter is commonly used in the following industries: agriculture, chemicals, mining, oil and gas, pharmaceuticals, and primary metals.
This organic vapor cartridge/filter combination works with 3M™ Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet attachment holders. The cartridge/filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain organic vapors and non-oil and oil particulates. The cartridge/filter has been assigned the color code “Magenta/Black”
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
Moldex N95 Series Particulate Respirator with Exhale Valve
Moldex N95 Series Particulate Respirator with Exhale Valve
2300N95 Series Particulate Respirators With Exhale Valve
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
TWECO Fluxcored SEFC MIG Gun
350 AMP 60% Duty cycle MIG gun with Lincoln Style rear connectors. Suitable for medium/heavy duty fabrication
Features:
- For use with all gasless wires
- High Impact-Resistant One-Piece “Straight” Handle
- Metal “Paddle” style trigger lever
- Micro-Switch Trigger Design incorporates a button style switch for start/stop wire feed
- Spare Trigger Leads in Cablehoz
- Heavy Duty design and front-end consumables
- Rugged & Duraable power Cablehoz with proven abrasion & heat ressitance
Specifications:
- Amps: 350 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: 3/32″
- Connector: Lincoln Style fits LN 7, 8, 9 , SP200
- Gas: Carbon Dioxide
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Semiautomatic Gas-Shielded Guns
Magnum® guns for MIG or flux-cored welding feature our classic curved handle and are available in a number of amperage ranges for use in many applications.
Top Features
· Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto body work and light maintenance or repair applications. Includes gun connector.
· One-piece modular trigger assembly – Molded out of high heat resistant material to withstand head and spatter and ensure long life.
· Gun tube design – Armored with an electrically insulated metal jacket optimizing fine wire welding performance.
· Abrasion-resistant, extruded rubber jacket – Adds strength and long life to the cable.
· Classic curved handle – Lightweight and balanced, providing a comfortable grip to reduce fatigue.
Processes
Flux-Core Gas Shielded
Wire Diameter Range
.025-.045 in. (0.6-1.2 mm)
What’s Included
· Contact Tip
· Gas Diffuser
· Gas Nozzle
· Insulator
· Cable Liner
· Gun Tube (60°)
Tweco Classic No. 3 .035″-.045″ Tweco Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Tweco Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Tweco Style
- Gas: Carbon Dioxide
Tweco Classic No. 2 .030″-.035″ Tweco Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Tweco Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Tweco Style
- Gas: Carbon Dioxide