Shop
Showing 1–20 of 24 results
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
J.W. Harris Stay Brite 1/16″ X 1# Spool
J.W. Harris Stay Brite 1/16″ X 1# Spool
The important advantage of Stay-Brite® solders is the greater strength of the overall component. After joining, its lower working temperature eliminates the weakening of the base metals caused by annealment from high brazing heat. The result is a stronger, more economical joint.
Stay-Brite® silver bearing solders have the same excellent affinity as SafetySilv® alloys for bonding with most of the ferrous and nonferrous alloys (including stainless steel, nickel, copper, brass, etc.) It provides a considerably higher than necessary elongation for sound dissimilar metal joints and vibration applications.
Stay-Brite® alloys range in temperature from 430°F to 535°F. Stay-Brite® solder eliminates oxide scale formed from brazing heat. No nitrogen purge is required for HVAC/R tubes. They are cadmium free and nontoxic. Stay-Brite® is a eutectic alloy with a single melting point of 430°F (221°C).
Specifications:
|
Package Size |
1 lb Spool |
|
Diameter |
1/16 |
Western Hose Repair Kit
Western Hose Repair Kit
Western Enterprises Hose Repair Kits
Convenient plastic case is durable and includes a full color label and description chart
Western® hose repair kit offers 12 different items most frequently used for hose repair.
Included are hose nuts and nipples, splicers, couplers, ferrules and a choice of crimping tool.
Convenient plastic case is durable and includes a full color label and description chart
For 1/4 Inch I.D. hose, B-Size fittings only
J.W. Harris Stay Brite Solder Kit
J.W. Harris Stay Brite Solder Kit
The Stay Brite lead-free solder kit contains .5 oz of silver solder and .5 oz of Stay Clear flux. It is for use on all metals except aluminum. This low temperature solder is excellent for many HVAC connections.
J.W. Harris AlSolder 500 Aluminum Solder Kit
J.W. Harris AlSolder 500 Aluminum Solder Kit
The Harris Al-Solder 500 aluminum solder & flux kit for torch or iron is used all solder-able alloys to each other and to dissimilar metals. Also for zinc die-cast. Forms excellent, corrosion resistant joints on the tough to solder aluminum alloys. Also beneficial as a high temperature solder on most other metals. Not recommended for magnesium.
Forms excellent corrosion resistant joints on the tough-to-solder aluminum alloys. Joins all solder-able aluminum alloys to each other and to dissimilar metals, both ferrous and nonferrous. Also beneficial as a high temperature solder on most other metals.
Procedure:
- Clean the area to be soldered
- Apply Stay Clean aluminum flux
- If using an open flame, heat indirectly with the torch in motion (do not direct the torch on the flux)
- Heat until the flux becomes a nut brown color
- Apply the alloy
- Discontinue heat as soon as flow
- Allow to cool. Remove flux residue with wire brush and hot water
Features:
· Tensile strength – Up to 20,000 PSI
· Solidus – 391ºF
· Liquidus – 482ºF
· Good color match on aluminum and zinc die cast
Specifications:
|
Package Includes |
1.75 oz Al-solder 500 1 oz Stay-Clean Aluminum Flux |
|
|
|
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
J.W. Harris 50/50 Solder 1/8″ 1# Spool
J.W. Harris 50/50 Solder 1/8″ 1# Spool
The Harris 50/50 common lead-bearing solder With some exceptions, can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core. Note: It is illegal to use lead solders in both public and private potable water systems.
CAUTION: Lead-bearing solders are not to be used in potable water systems.
Typical Application: A tin-lead alloy with a wide melting range. Used for automotive, radiator, general purpose soldering, electrical applications.
Specifications:
|
Diameter |
1/8″ |
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
Stay Silv 2 brazing filler metal is a medium temperature range alloy for brazing copper, and copper to brass. The addition of silver provides an 1190°F solidus which widens the melting range compared to Harris 0. Stay Silv 2 is useful for applications with clearances of 0.002″
25# package size
Western “B” Size Valved “Y” Connections, 200 PSIG, Brass, Male/Female, RH, 5/8″ – 18 for Inert Gas
Western “B” Size Valved “Y” Connections, 200 PSIG, Brass, Male/Female, RH, 5/8″ – 18 for Inert Gas
Western 411 Brass Y Connector with Valve
· Connection: CGA: 032
· 5/8-18 RH Female x 5/8-18 RH Male
· Number of Outlets: 2
· Operating Pressure: 200 psig
· Gas Service: Inert
Features
· One piece connections with brass body valves
· Precision shut off valves
· For use of two cutting and/or welding torches at once
Western Inert Gas Arc Hose Couplers, Brass, C-Size, Female/Female, RH to RH
Western Inert Gas Arc Hose Couplers, Brass, C-Size, Female/Female, RH to RH
Western Inert Arc Hose Coupler
Made from brass to ensure functionality and durability
Can accommodate up to 200 psi of pressure
· Material: Brass
· C-Size Fittings
· Connection Type: Female/Female
· Connections: CGA-034 to C Size
· Thread direction: RH to RH
Western Inert Gas Coupler – “B” Size Female-to-Female
Western Inert Gas Coupler – “B” Size Female-to-Female
Western Inert Arc Hose Coupler
Made from brass to ensure functionality and durability
Can accommodate up to 200 psi of pressure
· Material: Brass
· B-Size Fittings
· Connection Type: Female/Female
· Connections: CGA-032 to B Size (5/8 in-18)
· Thread direction: RH to RH
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
TWECO Fluxcored SEFC MIG Gun
350 AMP 60% Duty cycle MIG gun with Lincoln Style rear connectors. Suitable for medium/heavy duty fabrication
Features:
- For use with all gasless wires
- High Impact-Resistant One-Piece “Straight” Handle
- Metal “Paddle” style trigger lever
- Micro-Switch Trigger Design incorporates a button style switch for start/stop wire feed
- Spare Trigger Leads in Cablehoz
- Heavy Duty design and front-end consumables
- Rugged & Duraable power Cablehoz with proven abrasion & heat ressitance
Specifications:
- Amps: 350 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: 3/32″
- Connector: Lincoln Style fits LN 7, 8, 9 , SP200
- Gas: Carbon Dioxide
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Semiautomatic Gas-Shielded Guns
Magnum® guns for MIG or flux-cored welding feature our classic curved handle and are available in a number of amperage ranges for use in many applications.
Top Features
· Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto body work and light maintenance or repair applications. Includes gun connector.
· One-piece modular trigger assembly – Molded out of high heat resistant material to withstand head and spatter and ensure long life.
· Gun tube design – Armored with an electrically insulated metal jacket optimizing fine wire welding performance.
· Abrasion-resistant, extruded rubber jacket – Adds strength and long life to the cable.
· Classic curved handle – Lightweight and balanced, providing a comfortable grip to reduce fatigue.
Processes
Flux-Core Gas Shielded
Wire Diameter Range
.025-.045 in. (0.6-1.2 mm)
What’s Included
· Contact Tip
· Gas Diffuser
· Gas Nozzle
· Insulator
· Cable Liner
· Gun Tube (60°)