Shop
Showing 1–20 of 42 results
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard Model N1C58HQ Quik series 1 with 5/8″ bore, heavy duty, plated copper; threaded nozzle
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-62R, 1/8” recess, 5/8” Thread-on Welding Nozzle.
Nozzle is compatible with:
▪ Magnum PRO 250L
▪ Magnum PRO 350L
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-50R, 1/8” recess, 1/2” Thread-on Welding Nozzle
Nozzle is compatible with:
· Magnum PRO 250L
· Magnum PRO 350L
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ESAB 5/8″ Nozzle For MT Series MIG Guns
ESAB 5/8″ Nozzle For MT Series MIG Guns
ESAB Standard Duty 5/8” Welding Nozzle
Nozzle is compatible with:
▪ MT-200
▪ MT-400
▪ ST-23A
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Self-Insulated MIG Gun Nozzles, 1/2 in Bore, 1/8 in Recess
Compatible with MIG Guns:
· Tweco 135Amp Mini
· Tweco No. 1
ESAB 40 Amp Nozzle For PT-32 Plasma Torch
ESAB 40 Amp Nozzle For PT-32 Plasma Torch
ESAB 60 Amp Nozzle For Plasmarc PT-38/PowerCut 900 Plasma Torch
ESAB 60 Amp Nozzle For Plasmarc PT-38/PowerCut 900 Plasma Torch
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 5/8″ Centerfire Small Nozzle
Bernard 5/8″ Centerfire Small Nozzle
Bernard Model NS-5818C Centerfire series 5/8″ Bore, 1/8″ Recess, .875″ O.D, Copper small nozzle.
For use with Bernard Centerfire DS-1 small gas diffuser.
Nozzle is compatible with Bernard MIG Gun series:
▪ BTB series
▪ Clean Air Series
▪ Dura-Flex
▪ Fixed Liner Series
▪ FILTAIR Fume Extraction series
▪ Legacy Q-Gun series
▪ Legacy S-Gun series
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD 22 Series Air Cooled Nozzles for Classic No. 2, Spray Master 250, and Smoke Master 250 MIG guns are self insulated and compatible with HD52 Series Gas Diffusers.
Compatible with Tweco MIG guns:
- Classic No. 2
- Spray master 250
- Smoke Master 250
Features:
- Used in heavy duty welding application up to 250 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allows and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- 3-piece design – does not require an additional insulator
Specifications:
- Inside Diameter: 1/2″
- Style: Slip-On
- Nozzle/Contact Tip Relationship: 1/8″ – 5/32″ Tip recess
- Outside Diameter: .875″
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard Model N1C12Q Quik Tip series 1 with 1/2″ bore, plated copper; threaded nozzle.
Nozzle is compatible with:
BTB series
Clean Air Series
Dura-Flex
Fixed Liner Series
FILTAIR Fume Extraction series
Legacy Q-Gun series
Legacy S-Gun series
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds 21-62 Self-Insulated MIG Gun Nozzles
Best Welds Tweco style 21 Series 5/8” self-insulated MIG gun nozzles with 1/8” recess.
- Used in light to medium duty welding application up to 180 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut and Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allow and machining the internal threads to match the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- Tapered nozzle 3-piece design – does not require an additional insulator
- Nozzle threads onto the gas diffuser
Nozzle is compatible with:
▪ Tweco Mini
▪ Tweco No 1
▪ Best Welds 135
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″