Shop
Showing 1–20 of 31 results
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark by Victor Purging Regulator
Weldmark by Victor single-stage purging regulator features a durable forged brass body and cap with a high delivery pressure. They also feature easy-to-read gauges, and a stem-type seat mechanism for accurate gas flow.
Primarily used by HVAC professionals for nitrogen purging. May be used with helium, argon, co2 or any other inert gas.
Specifications:
- Gas Service: Inert Gas
- CGA: 580
- Outlet Connection: ¼”-37
- Delivery Pressure: 500 psig
- Max Inlet Pressure: 3000 psig
Victor ESS3-EDGE Series Inert Gas Single Stage Regulator, CGA-580
Victor ESS3-EDGE Series Inert Gas Single Stage Regulator, CGA-580
ESS3 Medium Capacity Single Stage Regulator
0781-3634
ESS3 EDGE Series, single stage, medium capacity regulator. The EDGE Series regulators have easy to read gauges with enhanced graphics, color-coded knobs for quick gas identification, and offer more natural and safer hand/body positioning for adjusting delivery pressure. Outperforming traditional designs, Victor Professional EDGE Series regulators offer a more consistent flow performance over a wide range of cylinder pressures.
Features
- High impact ABS gauge guard
- 5” gauges – steel
- 2” diaphragm – fabric reinforced neoprene
- Forged brass body
Specifications
- Weight: 3.5 lb.
- Dimensions: 6.6”W x 4.4”H x 3.6”D
- Delivery Range: 5-125 psig
- Outlet Connection: 5/8” – 18 RH(F)
- CGA: 580
- Gas Service: Air, Oxygen, Inert Gas
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Victor SR250C-540 Medium Duty Oxygen Single Stage Regulator, CGA-540
Victor SR250C-540 Medium Duty Oxygen Single Stage Regulator, CGA-540
SR 250 Series Oxygen Regulator
0781-0027
- Victor Professional Single Stage SR 250, Medium Capacity, C (80 PSIG), Oxygen, 540, 9/16-18 UNF (M). Medium duty gas control. Tried and true brass design delivers excellent gas control characteristics that meets the demands of precise cutting, welding and heating applications.
Features
- 2” brass gauges
- 75” diaphragm – fabric reinforced neoprene
Specifications
- 38” W x 5.13”H x 4.25”D
- Weight: 2 lbs. 15 oz.
- Delivery Range: 4-80 psig
- Max Inlet: 3,000 psig
- Outlet Connection: 9/16” – 18 (M)
- CGA: 540
Victor SR260A-510 Medium Duty Acetylene Single Stage Regulator, CGA-510
Victor SR260A-510 Medium Duty Acetylene Single Stage Regulator, CGA-510
SR 250 Series Acetylene Regulator
0781-0087
- Victor Professional Single Stage SR 260, Medium Capacity, A (15 PSIG), Acetylene, 510, 9/16-18 UNF LH. Medium duty gas control. Tried and true brass design delivers excellent gas control characteristics that meets the demands of precise cutting, welding and heating applications.
Features
- 2” brass gauges
- 75” diaphragm – fabric reinforced neoprene
Specifications
- 38” W x 5.13”H x 4.25”D
- Weight: 2 lbs. 15 oz.
- Delivery Range: 2-15 psig
- Max Inlet: 3,000 psig
- Outlet Connection: 9/16” – 18 (M)
- CGA: 510
TapRite CO2 Beer Regulator, CGA 320
TapRite CO2 Beer Regulator, CGA 320
Our Economy Series Primary Beer Regulator for Home Draft Dispense is easy to use and easy to maintain. The set screw adjustment makes it a “set and forget” tool for maintaining constant pressure into your system. The regulator’s brass body and zinc bonnet make it corrosion resistant and highly durable in a number of environments. This 1 Pressure 1 Product Regulator has a CGA320 Inlet, 5/16″Barb Shutoff w/Check, and 60lb and 2000lb Gauges so you can see both your output pressure and how much CO2 is left in your tank.
Specifications:
· CGA: 320
· Gas Service: Carbon Dioxide
· Pressure Range: 0 – 50 psig
· Regulator Outlet Type: 5/16″
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8236, 70 – 100 Amp Drag Shield Cap
Compatible:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100 Plasma Torch
Weldmark Balloon Inflator Regulator w/Handtight Nut/Gauge/Cutter/Hook
Weldmark Balloon Inflator Regulator w/Handtight Nut/Gauge/Cutter/Hook
Weldmark Balloon Inflator & Regulator
Weldmark balloon filling inflator and regulator for use with helium tanks to fill latex balloons. Easy to use, hand tighten to tank value then place balloon opening onto inflator nozzle and press the inflator down to release the gas into the balloon.
Features:
· Regulator with Full Size Hand-Tightening feature
· Easy to Read Pressure Gauge
· Durable Brass Fittings
· Fits all CGA-580 Tank Valves (the typical Helium, Argon, and Nitrogen valve on most tanks)
Victor G150 Light Duty Oxygen Single Stage Regulator, CGA-540
Victor G150 Light Duty Oxygen Single Stage Regulator, CGA-540
Victor Acetylene AR-B TurboTorch Style Medium Duty Regulator, CGA-520
Victor Acetylene AR-B TurboTorch Style Medium Duty Regulator, CGA-520
AR Series Acetylene Regulator
0386-0725
TurboTorch Professional AR-B Series Acetylene Regulator for precise gas control. Featuring all brass construction and contents gauge. Fits a “B” acetylene tank with 3/8” 24-thread hose nut.
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
TapRite Nitrogen Beverage Regulator, CGA 580
TapRite Nitrogen Beverage Regulator, CGA 580
Primary Beer, Wine, and Coffee Regulator, N2, 1P1P, CGA580 Inlet, 5/16″ Barb Shut-off w/Duckbill Check, 60lb & 3000lb Gauges. Suitable for use with Nitrogen, Mixed Gas (Beer Gas), and Argon.
Specifications:
· CGA: 580
· Gas Service: Argon, Nitrogen, Beer Gas
· Pressure Range: 0 – 50 psig
· Regulator Outlet Type: 5/16″
Thermal Dynamics 55-100 Amp Shield Cap For XT-301 Plasma Torch
Thermal Dynamics 55-100 Amp Shield Cap For XT-301 Plasma Torch
Thermal Dynamics Brand, Model 35-1034, 55 – 100 Amp Shield Cap
Compatible Plasma Torch is XT-301