Shop
Showing all 18 results
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Cable Liner 1/16″ – 5/64″ X 15′ For 550 Amp Magnum Pro 550 Semi Automatic Series MIG Guns
Lincoln Electric Model KP44-564-15 1/16” – 5/64” X 15’ Liner
Compatible with Magnum Pro 550 MIG guns.
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Liner 1/16″ – 5/64″ X 15′ for PRO 1260-15 Gun
Profax Model PX15-145 1/16” – 5/64” X 15’ Liner
Compatible with MIG Gun Profax 1260 Self Shielded Flux Core
Bernard Universal Liner 1/16″ X 15′
Bernard Universal Liner 1/16″ X 15′
Compatible with MIG Guns:
▪ Legacy Q
▪ Legacy S
▪ Legacy T
▪ BTB MIG
▪ TGX Series
J.W. Harris Stay Brite 1/16″ X 1# Spool
J.W. Harris Stay Brite 1/16″ X 1# Spool
The important advantage of Stay-Brite® solders is the greater strength of the overall component. After joining, its lower working temperature eliminates the weakening of the base metals caused by annealment from high brazing heat. The result is a stronger, more economical joint.
Stay-Brite® silver bearing solders have the same excellent affinity as SafetySilv® alloys for bonding with most of the ferrous and nonferrous alloys (including stainless steel, nickel, copper, brass, etc.) It provides a considerably higher than necessary elongation for sound dissimilar metal joints and vibration applications.
Stay-Brite® alloys range in temperature from 430°F to 535°F. Stay-Brite® solder eliminates oxide scale formed from brazing heat. No nitrogen purge is required for HVAC/R tubes. They are cadmium free and nontoxic. Stay-Brite® is a eutectic alloy with a single melting point of 430°F (221°C).
Specifications:
Package Size |
1 lb Spool |
Diameter |
1/16 |
Miller .030 – .035 X 15′ Liner For M-Series MIG Guns
Miller .030 – .035 X 15′ Liner For M-Series MIG Guns
15 ft replacement gun cable monocoil liner designed for .030-.035 inch (0.8-0.9 mm) wires. Liners help ensure efficient feeding of the wire from the spool, through the gun and to the contact tip. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
J.W. Harris Stay Brite Solder Kit
J.W. Harris Stay Brite Solder Kit
The Stay Brite lead-free solder kit contains .5 oz of silver solder and .5 oz of Stay Clear flux. It is for use on all metals except aluminum. This low temperature solder is excellent for many HVAC connections.
Best Welds .030-.035 Tweco Conduit
Best Welds .030-.035 Tweco Conduit
Best Welds Tweco Model 42-30-35-15 .030” – .035” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #1
▪ Professional #2
J.W. Harris AlSolder 500 Aluminum Solder Kit
J.W. Harris AlSolder 500 Aluminum Solder Kit
The Harris Al-Solder 500 aluminum solder & flux kit for torch or iron is used all solder-able alloys to each other and to dissimilar metals. Also for zinc die-cast. Forms excellent, corrosion resistant joints on the tough to solder aluminum alloys. Also beneficial as a high temperature solder on most other metals. Not recommended for magnesium.
Forms excellent corrosion resistant joints on the tough-to-solder aluminum alloys. Joins all solder-able aluminum alloys to each other and to dissimilar metals, both ferrous and nonferrous. Also beneficial as a high temperature solder on most other metals.
Procedure:
- Clean the area to be soldered
- Apply Stay Clean aluminum flux
- If using an open flame, heat indirectly with the torch in motion (do not direct the torch on the flux)
- Heat until the flux becomes a nut brown color
- Apply the alloy
- Discontinue heat as soon as flow
- Allow to cool. Remove flux residue with wire brush and hot water
Features:
· Tensile strength – Up to 20,000 PSI
· Solidus – 391ºF
· Liquidus – 482ºF
· Good color match on aluminum and zinc die cast
Specifications:
Package Includes |
1.75 oz Al-solder 500 1 oz Stay-Clean Aluminum Flux |
|
|
Best Welds .035-.045 Tweco Conduit
Best Welds .035-.045 Tweco Conduit
Best Welds Tweco Model 44-3545-15 .035” – .045” X 15’ liner.
Compatible with Tweco MIG Guns:
▪ Professional #3
▪ Professional #4
Stretch-Back FR Cotton Welding Jacket
Stretch-Back FR Cotton Welding Jacket
FEATURES & BENEFITS
- 9 oz. FR cotton front, sleeves, & collar (Navy)
- 7 oz. FR cotton stretch knit back (Heather Gray)
- Stand-up welder’s collar for enhanced protection
- 6 powder-coated stainless steel front snaps & wrist snaps
- Leather reinforcements on all front snaps
- Scribe pocket holds welding pencils, soapstone, & paint markers
- Inside pocket keeps small items secure
- 32″ length
- Sizes: M-4XL
J.W. Harris 50/50 Solder 1/8″ 1# Spool
J.W. Harris 50/50 Solder 1/8″ 1# Spool
The Harris 50/50 common lead-bearing solder With some exceptions, can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core. Note: It is illegal to use lead solders in both public and private potable water systems.
CAUTION: Lead-bearing solders are not to be used in potable water systems.
Typical Application: A tin-lead alloy with a wide melting range. Used for automotive, radiator, general purpose soldering, electrical applications.
Specifications:
Diameter |
1/8″ |
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
Stay Silv 2 brazing filler metal is a medium temperature range alloy for brazing copper, and copper to brass. The addition of silver provides an 1190°F solidus which widens the melting range compared to Harris 0. Stay Silv 2 is useful for applications with clearances of 0.002″
25# package size
Black Stallion FR Cotton Shop Coat, Navy
Black Stallion FR Cotton Shop Coat, Navy
FEATURES & BENEFITS
- 9 oz. flame-resistant treated cotton
- Welder’s collar for enhanced protection
- 7 convenient snap buttons, including collar button
- Leather reinforcements on all snaps
- Scribe pocket holds welding pencils, soap stones, and paint markers
- Snap wrist closures
- Inside pocket keeps small items secure
- Pass-through pocket
- 42″ length
Tweco Teflon Liner 1/16″ for Tweco No 3 & No 4
Tweco Teflon Liner 1/16″ for Tweco No 3 & No 4
Tweco Model 44TF-116-15 1/16” X 15’ Teflon Liner
Compatible with MIG Guns:
▪ Professional #3
▪ Professional #4
Tregaskiss Liner .035-.045 X 15′
Tregaskiss Liner .035-.045 X 15′
Tregaskiss Model 415-45-03 .035” – 3/64” X 15’ Liner
Compatible with MIG Guns:
▪ Tregaskiss MIG guns
▪ Bernard BTB
▪ Bernard TGX
▪ Bernard T-Gun
▪ Clean Air Fume Extraction
Tregaskiss 8″ Bronze Jump Liner for .030″ – 1/16″ Wire
Tregaskiss 8″ Bronze Jump Liner for .030″ – 1/16″ Wire
Tregaskiss™ Conventional Liners for MIG welding guns are made of high carbon music wire for smooth wire feed and long life.
Tregaskiss Model 415-25 conventional polymer liners for aluminum wire for 0.030″ – 1/16″ wire, 8″ length; bronze jump liner for use with liner
Best Welds .035-.040″ Tweco 15′ Liner
Best Welds .035-.040″ Tweco 15′ Liner
Best Welds Tweco Model 35-40-15 .035” – .040” X 15’ liner.
Compatible with Tweco MiniMIG guns.
Best Welds .030″-.035″ Miller Style Liner
Best Welds .030″-.035″ Miller Style Liner
15 ft replacement gun cable monocoil liner designed for .030-.035 inch (0.8-0.9 mm) wires. Liners help ensure efficient feeding of the wire from the spool, through the gun and to the contact tip. For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).