Shop
Showing all 6 results
Weldmark 71TGS Self Shielding MIG Wire
Weldmark 71TGS Self Shielding MIG Wire
E71T-GS is an all-position, self-shielded flux-cored wire designed for single pass fillet and lap welding on galvanized or carbon steel as thin as 20 gauge, without burn-through. Gasless Wire E71T-GS is commonly used on small portable 110 volt welding machines, offering smooth arc action with very little spatter. Travel speed is fast, penetration is good and slag removal is easy.
ESAB Coreshield 11 E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire 1/16″ 33# Spool
ESAB Coreshield 11 E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire 1/16″ 33# Spool
Lincoln Innershield NR-212 E71TG-G Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-212 E71TG-G Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-232 E71T-8 H16 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-211-MP E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire
Lincoln Innershield NR-211-MP E71T-11 Self Shielded Flux Core Carbon Steel Tubular Wire
Pferd 3/4″ X 18″ POLIVLIES Surface Cond. Belt Aluminum Oxide – Medium
Pferd 3/4″ X 18″ POLIVLIES Surface Cond. Belt Aluminum Oxide – Medium
Pferd 43563 Surface Conditioning Belt
Polivlies belts are designed for buffing, blending, cleaning, light deburring, finishing and polishing on all metals. They are particularly well suited for use on stainless steel and aluminum. These heavy-duty non-woven surface conditioning belts are manufactured with aluminum oxide impregnated fiber mesh on a tough web backing. The grain is evenly dispersed on the material, resulting in a smooth, uniform finish. The open structure resists loading and can be used wet or dry. The synthetic material will not rust or corrode. Its life can be increased by washing after use.
Specifications:
▪ Width: 3/4 Inch
▪ Grit: Medium
▪ Length 18 Inches
▪ Abrasive: Aluminum Oxide A