Shop
Showing 1–20 of 32 results
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard 5/8″ Quik Tip Thredded Nozzle
Bernard Model N1C58HQ Quik series 1 with 5/8″ bore, heavy duty, plated copper; threaded nozzle
Compatible with MIG guns:
- BTB Series
- Clean Air Series
- Dura-Flux Fixed Liner Series
- FILTAIR Fume Extraction Series
- Legacy Q-Gun
- S-Gun Series
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 5/8″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-62R, 1/8” recess, 5/8” Thread-on Welding Nozzle.
Nozzle is compatible with:
▪ Magnum PRO 250L
▪ Magnum PRO 350L
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Nozzle 1/8″ X 1/2″ 350A Thread-on for Magnum Pro
Lincoln Brand, Model KP2742-1-50R, 1/8” recess, 1/2” Thread-on Welding Nozzle
Nozzle is compatible with:
· Magnum PRO 250L
· Magnum PRO 350L
ESAB 5/8″ Nozzle For MT Series MIG Guns
ESAB 5/8″ Nozzle For MT Series MIG Guns
ESAB Standard Duty 5/8” Welding Nozzle
Nozzle is compatible with:
▪ MT-200
▪ MT-400
▪ ST-23A
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Best Welds 1/2″ 21 Series Tweco Style Nozzle (2 pack)
Self-Insulated MIG Gun Nozzles, 1/2 in Bore, 1/8 in Recess
Compatible with MIG Guns:
· Tweco 135Amp Mini
· Tweco No. 1
ESAB 40 Amp Nozzle For PT-32 Plasma Torch
ESAB 40 Amp Nozzle For PT-32 Plasma Torch
ESAB 60 Amp Nozzle For Plasmarc PT-38/PowerCut 900 Plasma Torch
ESAB 60 Amp Nozzle For Plasmarc PT-38/PowerCut 900 Plasma Torch
J.W. Harris Stay Brite 1/16″ X 1# Spool
J.W. Harris Stay Brite 1/16″ X 1# Spool
The important advantage of Stay-Brite® solders is the greater strength of the overall component. After joining, its lower working temperature eliminates the weakening of the base metals caused by annealment from high brazing heat. The result is a stronger, more economical joint.
Stay-Brite® silver bearing solders have the same excellent affinity as SafetySilv® alloys for bonding with most of the ferrous and nonferrous alloys (including stainless steel, nickel, copper, brass, etc.) It provides a considerably higher than necessary elongation for sound dissimilar metal joints and vibration applications.
Stay-Brite® alloys range in temperature from 430°F to 535°F. Stay-Brite® solder eliminates oxide scale formed from brazing heat. No nitrogen purge is required for HVAC/R tubes. They are cadmium free and nontoxic. Stay-Brite® is a eutectic alloy with a single melting point of 430°F (221°C).
Specifications:
Package Size |
1 lb Spool |
Diameter |
1/16 |
Bernard 5/8″ Centerfire Small Nozzle
Bernard 5/8″ Centerfire Small Nozzle
Bernard Model NS-5818C Centerfire series 5/8″ Bore, 1/8″ Recess, .875″ O.D, Copper small nozzle.
For use with Bernard Centerfire DS-1 small gas diffuser.
Nozzle is compatible with Bernard MIG Gun series:
▪ BTB series
▪ Clean Air Series
▪ Dura-Flex
▪ Fixed Liner Series
▪ FILTAIR Fume Extraction series
▪ Legacy Q-Gun series
▪ Legacy S-Gun series
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
LINCOLN GAS NOZZLE FOR 100L THREAD-ON FLUSH .5 ID
J.W. Harris Stay Brite Solder Kit
J.W. Harris Stay Brite Solder Kit
The Stay Brite lead-free solder kit contains .5 oz of silver solder and .5 oz of Stay Clear flux. It is for use on all metals except aluminum. This low temperature solder is excellent for many HVAC connections.
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD22-50 1/2″ Slip-On Nozzle For Spray Master Series MIG Guns
Tweco HD 22 Series Air Cooled Nozzles for Classic No. 2, Spray Master 250, and Smoke Master 250 MIG guns are self insulated and compatible with HD52 Series Gas Diffusers.
Compatible with Tweco MIG guns:
- Classic No. 2
- Spray master 250
- Smoke Master 250
Features:
- Used in heavy duty welding application up to 250 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut & Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allows and is crimped in place to allow the nozzle to slide over a metal spring which is part of the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- 3-piece design – does not require an additional insulator
Specifications:
- Inside Diameter: 1/2″
- Style: Slip-On
- Nozzle/Contact Tip Relationship: 1/8″ – 5/32″ Tip recess
- Outside Diameter: .875″
J.W. Harris AlSolder 500 Aluminum Solder Kit
J.W. Harris AlSolder 500 Aluminum Solder Kit
The Harris Al-Solder 500 aluminum solder & flux kit for torch or iron is used all solder-able alloys to each other and to dissimilar metals. Also for zinc die-cast. Forms excellent, corrosion resistant joints on the tough to solder aluminum alloys. Also beneficial as a high temperature solder on most other metals. Not recommended for magnesium.
Forms excellent corrosion resistant joints on the tough-to-solder aluminum alloys. Joins all solder-able aluminum alloys to each other and to dissimilar metals, both ferrous and nonferrous. Also beneficial as a high temperature solder on most other metals.
Procedure:
- Clean the area to be soldered
- Apply Stay Clean aluminum flux
- If using an open flame, heat indirectly with the torch in motion (do not direct the torch on the flux)
- Heat until the flux becomes a nut brown color
- Apply the alloy
- Discontinue heat as soon as flow
- Allow to cool. Remove flux residue with wire brush and hot water
Features:
· Tensile strength – Up to 20,000 PSI
· Solidus – 391ºF
· Liquidus – 482ºF
· Good color match on aluminum and zinc die cast
Specifications:
Package Includes |
1.75 oz Al-solder 500 1 oz Stay-Clean Aluminum Flux |
|
|
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard 1/2″ Bore Quik Tip Series 1 Series Nozzle
Bernard Model N1C12Q Quik Tip series 1 with 1/2″ bore, plated copper; threaded nozzle.
Nozzle is compatible with:
BTB series
Clean Air Series
Dura-Flex
Fixed Liner Series
FILTAIR Fume Extraction series
Legacy Q-Gun series
Legacy S-Gun series
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds Tweco 21-62 5/8″ Nozzle 2 Pack
Best Welds 21-62 Self-Insulated MIG Gun Nozzles
Best Welds Tweco style 21 Series 5/8” self-insulated MIG gun nozzles with 1/8” recess.
- Used in light to medium duty welding application up to 180 amperes
- 3-piece nozzle design includes: Nozzle Housing – Cut and Formed from 122 DHP copper alloy tubing, Nozzle Insert – machined from a solid brass allow and machining the internal threads to match the gas diffuser, Nozzle insulator – made from G7 silicone material, providing the electrical insulation needed from the gas diffuser
- Easy identification – Part No. rolled stamped on the outside surface
- Tapered nozzle 3-piece design – does not require an additional insulator
- Nozzle threads onto the gas diffuser
Nozzle is compatible with:
▪ Tweco Mini
▪ Tweco No 1
▪ Best Welds 135
J.W. Harris 50/50 Solder 1/8″ 1# Spool
J.W. Harris 50/50 Solder 1/8″ 1# Spool
The Harris 50/50 common lead-bearing solder With some exceptions, can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core. Note: It is illegal to use lead solders in both public and private potable water systems.
CAUTION: Lead-bearing solders are not to be used in potable water systems.
Typical Application: A tin-lead alloy with a wide melting range. Used for automotive, radiator, general purpose soldering, electrical applications.
Specifications:
Diameter |
1/8″ |
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
Stay Silv 2 brazing filler metal is a medium temperature range alloy for brazing copper, and copper to brass. The addition of silver provides an 1190°F solidus which widens the melting range compared to Harris 0. Stay Silv 2 is useful for applications with clearances of 0.002″
25# package size