Shop
Showing 21–40 of 63 results
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics 30-120 Amp Electrode For SL60/100 Plasma Torch
Thermal Dynamics Brand, Model 9-8215, 30 – 120 Amp Electrode
Compatible with Plasma Torch:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60
▪ SL100
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamics 100 Amp Air/Oxygen Tip For XT-301 Plasma Torch
Thermal Dynamic Brand, Model 35-1053 100 Amp Air/Oxygen Tip
Compatible with XT-301 plasma torch.
Power Cable Adapter for 9 & 17 Torches
Power Cable Adapter for 9 & 17 Torches
TIG Torch Power Cable Adapter – Model: 105Z57 – Stud Connector for 9 and 17 Series 1 PC TIG Torches
- High-quality TIG torch power cable adapter for Air Cooled WP Series TIG Torches equipped with 1 piece cable.
- Model 105Z57 for WP-9 and WP-17 TIG Torches.
- Compatible TIG cables: 57Y01-R & 57Y03-R
J.W. Harris AlSolder 500 Aluminum Solder Kit
J.W. Harris AlSolder 500 Aluminum Solder Kit
The Harris Al-Solder 500 aluminum solder & flux kit for torch or iron is used all solder-able alloys to each other and to dissimilar metals. Also for zinc die-cast. Forms excellent, corrosion resistant joints on the tough to solder aluminum alloys. Also beneficial as a high temperature solder on most other metals. Not recommended for magnesium.
Forms excellent corrosion resistant joints on the tough-to-solder aluminum alloys. Joins all solder-able aluminum alloys to each other and to dissimilar metals, both ferrous and nonferrous. Also beneficial as a high temperature solder on most other metals.
Procedure:
- Clean the area to be soldered
- Apply Stay Clean aluminum flux
- If using an open flame, heat indirectly with the torch in motion (do not direct the torch on the flux)
- Heat until the flux becomes a nut brown color
- Apply the alloy
- Discontinue heat as soon as flow
- Allow to cool. Remove flux residue with wire brush and hot water
Features:
· Tensile strength – Up to 20,000 PSI
· Solidus – 391ºF
· Liquidus – 482ºF
· Good color match on aluminum and zinc die cast
Specifications:
|
Package Includes |
1.75 oz Al-solder 500 1 oz Stay-Clean Aluminum Flux |
|
|
|
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
Cutmaster 60i Thermal Dynamics Plasma Cutter
Cutmaster 60i Thermal Dynamics Plasma Cutter
Featured:
- Built for portability and durability with the integral multi-handle design, available in either a 1 phase or 3 phase unit
- 50% Duty Cycle at 60A with automatic multi-voltage detection from 208-480V
- Industrial SL60QD 1Torch quick disconnect with ATC® (Advanced Torch Connector) allowing selective replacement of either the torch handle assembly or the torch leads, using the patented SureLok® technology
- Up to 3/4 in. (20 mm) recommended cut capacity with maximum sever of 1-1/2 in. (38 mm) and 3/4 in. (20 mm) pierce capability
- High-visibility, oversized display with gas optimizer technology and consumables end-of-life indicator, makes setup and usage simple and productive
- Cutmaster Black Series electrode included for up to 60% longer life of consumable parts
- Industry leading 4-year warranty on power supply and 1-year warranty on torch
THD1-5630-1
Cutmaster 82 Thermal Dynamics Plasma Cutter
Cutmaster 82 Thermal Dynamics Plasma Cutter
Featured:
- Front Panel LEDs indicate status conditions for maximum efficiency
- Storage compartment for convenient access to spare parts and consumables.
- Versatile 1Torch with ATC disconnect makes it easy to add lead extensions or convert to a machine torch.
- True Guard roll bar provides easy transportation and protection for unmatched durability.
- Multi-voltage allows operation from 208 to 480 Volts in a single power supply.
- Auto Pilot Restart feature instantly reignites the pilot arc while cutting expanded metals.
- Lighter weight design for maximum portability
PERFORMANCE
- Maximum Cut – 1 1/2″ (40 mm)
- Recommended Cut – 3/4″ (20 mm)
- Pierce Rating – 5/8″ (15 mm)
- Max Amperage Output – 80A
- Output Power – 9 kW
DIMENSIONS
- 12″ W x 15″ H x 24″ D (305 mm x 381 mm x 610 mm)
WEIGHT
- 43 lbs (19.5 kg)
TORCH
- SL60
- Air Pressure – 70 psi (4.8 bar)
- 6.7 cfm (190 l/m)
INPUT VOLTAGE
- 208-230/460V, 1/3 ph, 50/60 Hz
- 400V, 3 ph, 50 Hz
- 600V, 3 ph, 50/60 Hz
DUTY CYCLE (@ 40º C)
- 40% @ 80A
- 60% @ 65A
- 100% @ 55A
AMPERAGE DRAW
- 72A @ 230V, 1 ph
- 39A @ 230V, 3 ph
- 21A @ 460V, 3 ph
J. W. Harris E70S-2 Steel TIG Rod 10# box
J. W. Harris E70S-2 Steel TIG Rod 10# box
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamics 70 – 100 Amp Drag Shield Cap For SL60/100 Plasma Torch
Thermal Dynamic Brand, Model 9-8236, 70 – 100 Amp Drag Shield Cap
Compatible:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100 Plasma Torch
Anchor Brand 18cg Cup Gasket 100-18CG
Anchor Brand 18cg Cup Gasket 100-18CG
Anchor Cup Gasket, 18CG, PK2
For use with Torch# 17, 18, 26
Anchor Miller Style .023 Standard Duty Contact Tip
Anchor Miller Style .023 Standard Duty Contact Tip
Replacement tip designed for .023 inch (0.9 mm) solid or flux-cored welding wires.
For use with M-10, M-15, M-25, M-40, M-100 or M-150 MIG gun (standard gun on most Millermatic MIG welders).
J. W. Harris Stay-Silv 5 Medium-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J. W. Harris Stay-Silv 5 Medium-Silver PhosCopper Brazing Alloy 1/8″ X 20″
The Harris Stay-Silv 5 medium-silver PhosCopper brazing alloy is designed for copper to copper applications. It can also be used on copper to low zinc brass but this application requires use of Stay Silv white brazing flux.
Like many phosphorus/copper brazing filler metals Stay Silv 5 will flow rapidly when heated quickly to its liquidus. This allows penetration into tight clearance connections. With slower heating the alloy melting range provides the ability to filler wider gaps.
Stay Silv 5 is often chosen as an economical alternative to higher silver content alloys for copper and brass applications.
Stay Silv 5 is not recommended for brazing steel or other ferrous base metals. In these applications the phosphorus content promote
Specifications:
| Package Size | 14 Stick Tube |
| Diameter | 1/8″ |
J.W. Harris 50/50 Solder 1/8″ 1# Spool
J.W. Harris 50/50 Solder 1/8″ 1# Spool
The Harris 50/50 common lead-bearing solder With some exceptions, can be used to join copper and most copper alloys, lead, nickel alloys and steel. Tin-lead solders are not recommended for joints subject to high stress or vibration in the cooling industry due to lack of sufficient elongation properties. These solders are also available with rosin or acid core. Note: It is illegal to use lead solders in both public and private potable water systems.
CAUTION: Lead-bearing solders are not to be used in potable water systems.
Typical Application: A tin-lead alloy with a wide melting range. Used for automotive, radiator, general purpose soldering, electrical applications.
Specifications:
|
Diameter |
1/8″ |
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J.W. Harris Stay-Silv 2 Low-Silver PhosCopper Brazing Alloy 1/8″ X 20″
Stay Silv 2 brazing filler metal is a medium temperature range alloy for brazing copper, and copper to brass. The addition of silver provides an 1190°F solidus which widens the melting range compared to Harris 0. Stay Silv 2 is useful for applications with clearances of 0.002″
25# package size
Anchor Brand White Lens Cleaning Towel 5″ X 8″
Anchor Brand White Lens Cleaning Towel 5″ X 8″
Anchor Brand 9-3/4″ X 19″ Clear Visor For Fibre Metal
Anchor Brand 9-3/4″ X 19″ Clear Visor For Fibre Metal
