Shop
Showing 1–20 of 30 results
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads – Red
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
The Harris Stay-Silv 15 PhosCopper Brazing Alloy is the industry standard for air conditioning and refrigeration applications. Still widely used, but now often replaced by Dynaflow® in many HVAC/R applications. For many years the standard of the industry, the 15% silver alloy has proven its value. This filler metal is excellent for situations in which close fit-up does not exist, and where thermal expansion and service vibration are involved.
Specifications:
Diameter | 1/8″ |
J.W. Harris Blockade 2mm x 20 Stick Tube
J.W. Harris Blockade 2mm x 20 Stick Tube
The Harris Blockage Phosphorus Tin Silicon Brazing Alloy is a proprietary phosphorus-tin-silicon alloy engineered as an inexpensive alternative to copper-copper and copper-brass alloys. It is self-fluxing on copper and its lower melting temperature makes it an excellent choice for brass connections. BLOCKADE flows rapidly but can be used to “cap” brazed joints.
Blockade’s® unique silicon addition offers significant advantages over phos/copper and silver/phos/copper, (BCuP), brazing alloys. Among the benefits are: bright alloy color during cooling that allows visual verification of a good braze joint, improved ductility over BCuP-2 alloy, reduced brazing temperature, and reduced material costs. It is often used with Stay-Silv® white brazing flux as a replacement for high silver alloys when brazing brass.
Specifications:
Diameter | 2mm |
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Jokisch Premixed Anti Spatter 1 Gallon Cannister
Jokisch Premixed Anti Spatter 1 Gallon Cannister
Miller Millermatic & Diversion Welding Cart
Miller Millermatic & Diversion Welding Cart
Genuine Miller Heavy-Duty Welder cart/cylinder rack has 8” rubber wheels in back and front casters for easy maneuvering. This running gear is perfect for use with Millermatic® 125 Hobby, 141, 190, 211, Multimatic™ 200, 215 and Diversion™ or any TIG, MIG, Plasma machines of similar size. The gas cylinder rack is designed to hold one gas cylinder no larger than 7 in (178 mm) diameter, maximum weight 65 lbs. pounds (80 cubic foot capacity is ideal).
Metal Man Deluxe Welding Cabinet
Metal Man Deluxe Welding Cabinet
The Metal Man deluxe welding cabinet provides an integrated all-in-one solution for a portable welder or plasma cutter
applications. Designed for equipment to sit on top of cabinet, and a 7 1/2in. gas cylinder configuration, it makes maneuvering a snap. It includes 4 drawers of varying sizes that provide convenient storage for helmet, hammer, brush and other welding accessories, along with hooks that provide easy access to welding cables.
SPECIFICATIONS:
- 150 lbs. capacity
- Dimensions: 28.3” X 17.6” X 33.5”
- Weight: 94 lbs.
- Steel construction with power coat finish
- Ball bearing drawer slides
- 2 locking front casters
- 7” rear wheels
FEATURES:
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
Walter E-Weld Weld Spatter Release Emulsion
Walter E-Weld Weld Spatter Release Emulsion
- Anti-Spatter Emulsion: the e-weld cleaning solution protects the work surfaces from weld spatters, thus saving you from time-consuming and costly rework. The anti-spatter solution prevents weld porosity and ceases weld cracks
- High-Performance: a safe and natural solution, the weld spatter emulsion does not interfere with paint adhesion, allowing you to do immediate painting with no surface damage. Just a thin protective coat of e-weld solution prevents spatter adhesion
- Applications: the weld spatter cleaner is used in general-purpose welding for protecting workpieces, torches, robots and jigs. The spatter cleaning solution can be effectively applied on all weldable metals
- Non-Flammable: the e-welding solution is formulated using natural extracts. This spatter release emulsion is VOC free and does not contain any harmful solvent or silicone substances
- Specifications: the anti-spatter solution comes in a 20L container. You can use a refillable sprayer for ultra-fine and uniform distribution. The anti-spatter has a green color for better view on workpieces
J. W. Harris Stay-Silv 5 Medium-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J. W. Harris Stay-Silv 5 Medium-Silver PhosCopper Brazing Alloy 1/8″ X 20″
The Harris Stay-Silv 5 medium-silver PhosCopper brazing alloy is designed for copper to copper applications. It can also be used on copper to low zinc brass but this application requires use of Stay Silv white brazing flux.
Like many phosphorus/copper brazing filler metals Stay Silv 5 will flow rapidly when heated quickly to its liquidus. This allows penetration into tight clearance connections. With slower heating the alloy melting range provides the ability to filler wider gaps.
Stay Silv 5 is often chosen as an economical alternative to higher silver content alloys for copper and brass applications.
Stay Silv 5 is not recommended for brazing steel or other ferrous base metals. In these applications the phosphorus content promote
Specifications:
Package Size | 14 Stick Tube |
Diameter | 1/8″ |