Shop
Showing 1–20 of 30 results
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
The Harris Stay-Silv 15 PhosCopper Brazing Alloy is the industry standard for air conditioning and refrigeration applications. Still widely used, but now often replaced by Dynaflow® in many HVAC/R applications. For many years the standard of the industry, the 15% silver alloy has proven its value. This filler metal is excellent for situations in which close fit-up does not exist, and where thermal expansion and service vibration are involved.
Specifications:
| Diameter | 1/8″ |
J.W. Harris Blockade 2mm x 20 Stick Tube
J.W. Harris Blockade 2mm x 20 Stick Tube
The Harris Blockage Phosphorus Tin Silicon Brazing Alloy is a proprietary phosphorus-tin-silicon alloy engineered as an inexpensive alternative to copper-copper and copper-brass alloys. It is self-fluxing on copper and its lower melting temperature makes it an excellent choice for brass connections. BLOCKADE flows rapidly but can be used to “cap” brazed joints.
Blockade’s® unique silicon addition offers significant advantages over phos/copper and silver/phos/copper, (BCuP), brazing alloys. Among the benefits are: bright alloy color during cooling that allows visual verification of a good braze joint, improved ductility over BCuP-2 alloy, reduced brazing temperature, and reduced material costs. It is often used with Stay-Silv® white brazing flux as a replacement for high silver alloys when brazing brass.
Specifications:
| Diameter | 2mm |
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
Capital Weld Cleaners Weld Cleaning Brushes
Capital Weld Cleaners Weld Cleaning Brushes
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Weiler Stainless Steel Small Hand Wire Brush
Weiler Stainless Steel Small Hand Wire Brush
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
|
Diameter: |
1″ |
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
Weldmark Brush Scratch SS Curved Handle 3″ X 19″
Weldmark Brush Scratch SS Curved Handle 3″ X 19″
Weldmark Stainless Steel Wire Curved Handle Scratch 3X19 Brush
These are excellent industrial brushes for heavy duty cleaning purposes.
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
|
Diameter: |
1″ |