Shop
Showing all 16 results
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
J.W. Harris Stay Silv 15 1/8″ 28 Stick Tube
The Harris Stay-Silv 15 PhosCopper Brazing Alloy is the industry standard for air conditioning and refrigeration applications. Still widely used, but now often replaced by Dynaflow® in many HVAC/R applications. For many years the standard of the industry, the 15% silver alloy has proven its value. This filler metal is excellent for situations in which close fit-up does not exist, and where thermal expansion and service vibration are involved.
Specifications:
Diameter | 1/8″ |
J.W. Harris Blockade 2mm x 20 Stick Tube
J.W. Harris Blockade 2mm x 20 Stick Tube
The Harris Blockage Phosphorus Tin Silicon Brazing Alloy is a proprietary phosphorus-tin-silicon alloy engineered as an inexpensive alternative to copper-copper and copper-brass alloys. It is self-fluxing on copper and its lower melting temperature makes it an excellent choice for brass connections. BLOCKADE flows rapidly but can be used to “cap” brazed joints.
Blockade’s® unique silicon addition offers significant advantages over phos/copper and silver/phos/copper, (BCuP), brazing alloys. Among the benefits are: bright alloy color during cooling that allows visual verification of a good braze joint, improved ductility over BCuP-2 alloy, reduced brazing temperature, and reduced material costs. It is often used with Stay-Silv® white brazing flux as a replacement for high silver alloys when brazing brass.
Specifications:
Diameter | 2mm |
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
J.W. Harris Low Fuming Bronze 15 Bare Copper Alloy Gas Rod 3/32″ X 36″ 10# PKG
The Harris 15 Low Fuming Brazing Bronze is copper- zinc braze rod developed primarily to braze steel and some cast iron grades including malleable and grey iron. It can be used to join copper but due to the elevated melting temperature care must be taken during brazing to avoid overheating or melting the copper. It is used with the oxy-fuel process.
Harris 15 is considered a “braze-welding”
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 36 Grit
Pferd 42514 Quick Change Disc
COMBIDISC® tools cover the full range of surface finishing applications. From coarse grinding through surface texturing to face-down mirror polishing, these products address the most demanding and sophisticated machining tasks.
COMBIDISC® Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC® for virtually any material or application.
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Aluminum Oxide A:
COMBIDISC® abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
J. W. Harris Stay-Silv 5 Medium-Silver PhosCopper Brazing Alloy 1/8″ X 20″
J. W. Harris Stay-Silv 5 Medium-Silver PhosCopper Brazing Alloy 1/8″ X 20″
The Harris Stay-Silv 5 medium-silver PhosCopper brazing alloy is designed for copper to copper applications. It can also be used on copper to low zinc brass but this application requires use of Stay Silv white brazing flux.
Like many phosphorus/copper brazing filler metals Stay Silv 5 will flow rapidly when heated quickly to its liquidus. This allows penetration into tight clearance connections. With slower heating the alloy melting range provides the ability to filler wider gaps.
Stay Silv 5 is often chosen as an economical alternative to higher silver content alloys for copper and brass applications.
Stay Silv 5 is not recommended for brazing steel or other ferrous base metals. In these applications the phosphorus content promote
Specifications:
Package Size | 14 Stick Tube |
Diameter | 1/8″ |
Thermal Dynamics Stand-Off Guide For Cutmaster 52/82/102/152 Plasma Torch
Thermal Dynamics Stand-Off Guide For Cutmaster 52/82/102/152 Plasma Torch
Thermal Dynamic Brand, Model 9-8281, Stand-Off Guide
Compatible Plasma Torches:
▪ CUTMASTER 52
▪ CUTMASTER 82
▪ CUTMASTER 102
▪ CUTMASTER 152
▪ SL60/100
Thermal Dynamics Stand-Off Guide For PCH-75 Plasma Torch
Thermal Dynamics Stand-Off Guide For PCH-75 Plasma Torch
Thermal Dynamics Brand, Model 8-7575, Stand-Off Guide
Compatible Plasma Torches: PCH-75
ESAB 90 Amp Stand-Off Guide For PT-38 Plasma Torch
ESAB 90 Amp Stand-Off Guide For PT-38 Plasma Torch
ESAB Brand, Model 0558006613, 90 Amp Stand-Off
Compatible PT-38 Plasma Torch
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
3M 4-1/2″ Cubitron II Fibre Discs 987C 60 Grit
· 3M Precision Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure
· PSG runs cooler and disc life is significantly longer, completing more parts per disc and requiring fewer disc changes
· Stiff fiber backing and a strong resin bond provide durability and tear-resistance for heavyweight applications such as high-pressure weld grinding or beveling
· Grinding aid incorporated on the disc minimizes grinding temperatures for heat-sensitive alloys
3M™ Cubitron© II Fibre Disc 987C offers significant gains in productivity on medium to heavy-duty operations with our exceptionally high-performing 3M Precision Shaped Grain combined with a stiff fiber backing. This disc achieves a higher cut-rate, greater durability, and longer life than other fiber discs””all with less grinding pressure.
3M™ Cubitron© II Fibre Disc 987C is suitable for use on almost all metals and excels in stainless steel and other nickel alloy applications. It is ideal for weld removal, beveling, removing mill scale, pits and imperfections, and more. Because 3M Precision Shaped Grain generates an exceptionally high cut-rate with less pressure, operators can finish tough tasks faster and with less fatigue. A grinding aid incorporated on the disc makes this an outstanding product for all types of metal””it helps keep the disc cooler on stainless steel and heat-sensitive metals such as nickel alloys and titanium, thereby reducing metal discoloration/oxidation and the chance of heat-related stress cracks. Moreover, because the abrasive itself stays cooler and sharper, our 3M Precision Shaped Grain discs last significantly longer than conventional ceramic grain discs, delivering a lower cost per grind with fewer disc changes.
Our 3M™ Cubitron© II products have raised the bar for high-performing abrasives. 3M Precision Shaped Grain outcuts and outlasts conventional ceramic industrial abrasives and requires less grinding force to achieve superior performance. The result is that operators can grind faster and complete more parts per disc with less muscle-work and fatigue.
To create 3M Precision Shaped Grain, our engineers started with 3M™ Ceramic Abrasive Grain and used proprietary technology to form the grains into triangular structures and electrostatically orient them on the backing to form sharp peaks that maximize cutting potential. These peaks slice cleanly through metal, rather than gouging or plowing as traditional abrasives do, and continuously self-sharpen as the points break off. This generates a super-fast cut and lessens heat build-up due to friction, reducing heat-related stress cracks and discoloration.
3M Precision Shaped Grain also wears evenly, and because the abrasive itself stays cooler and sharper, 3M™ Cubitron© II products last significantly longer than their conventional ceramic counterparts, ensuring extended high performance in production applications.
Fiber discs are heavy-duty discs ideal for weld removal, grinding, and blending large and small areas of metal surfaces. They feature a tough, stiff backing made from vulcanized fiber that resist wear and can handle tough grinding applications.
Specifications | |
Abrasive Material | Precision Shaped Ceramic Grain |
Abrasive Trade Name | Cubitron II |
Applicable Materials | Cobalt & Nickel Alloy, Stainless Steel, Titanium |
Applications | Grinding; Metal Stock Removal |
Body Material | Fiber |
Bond | Resin |
Brand | 3M ABRASIVE |
Color | Orange |
Dia. [Nom] | 4 1/2 in |
Grit | 60 |
Mounting | Threaded Hole |
Speed [Max] | 13,300 rpm |
Style | 987C |
Type | Fibre Disc |
Used With | Right Angle Grinder |
Pferd 7″ Fibre Disc Zircconium 36 Grit
Pferd 7″ Fibre Disc Zircconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: |
7″ |
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Pferd 4-1/2″ Fibre Disc Zirconium 36 Grit
Zirconia Alumina Z – Standard (Plain Arbor Hole)
Designed for coarse grinding and high stock removal with an extended service life. Zirconia alumina is a high-performance abrasive which delivers best results on high-powered angle grinders at increase contact pressure.
Specifications:
Diameter: | 4-1/2″ |
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Pferd 5″ PSA Disc Aluminum Oxide 50 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Pferd 5″ PSA Disc Aluminum Oxide 36 Grit
Aluminum Oxide A – 5″ Diameter Disc
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 120 Grit
Pferd 42520 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 120
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 80 Grit
Pferd 42518 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 80
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 3″ COMBIDISC Type CDR Aluminum Oxide 60 Grit
Pferd 42517 Quick Change Disc
COMBIDISC Abrasive Discs are great for grinding of steel and a variety of other metals and alloys. A wide range of abrasive grains, backing materials, and coatings ensure that there is a COMBIDISC for virtually any material or application.
COMBIDISC abrasive discs with aluminum oxide A grain are suitable for use on metals and other materials.
For general-purpose grinding from coarse to very fine, in diverse applications (industry, trades, DIY).
Specifications:
▪ Diameter: 3 Inch
▪ Grit: 60
▪ RPM Speed: 5,000 – 9,000
▪ Quick Change Hub: CDR – Roll On
▪ Abrasive: Aluminum Oxide A