Shop
Showing 1–20 of 21 results
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
Weldmark Brush Scratch SS Curved Handle Toothbrush 3″ X 7″
J.W. Harris Stay Clean Paste Flux – 4oz
J.W. Harris Stay Clean Paste Flux – 4oz
Stay-Clean Paste Soldering Flux is designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean Paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.
Specifications:
Package Size |
4 oz. Bottle |
J.W. Harris Solar Flux Type B 1# Can
J.W. Harris Solar Flux Type B 1# Can
Solar Flux is a complex chemical compound in the form of a very fine powder. Solar Flux is mixed with alcohol (methanol/methyl alcohol preferred) and brushed on the weld joint. It is formulated to shield the back of the weld joint from oxygen, dissipate heat and unwanted oxides, and to clean the surface of the metal. It will aid in the flow of filler metal over base metal and form a protective barrier to prevent re-oxidation and heat scale.
Type B for stainless steel, (except 309, 310), precipitation hardening steels, chrome-moly steels, other alloy steels with nickel content below 25%
Specifications:
Package Size | 1 lb Can |
Capital Weld Cleaners Weld Cleaning Brushes
Capital Weld Cleaners Weld Cleaning Brushes
Weiler Stainless Steel Small Hand Wire Brush
Weiler Stainless Steel Small Hand Wire Brush
J.W. Harris Stay Clean Aluminum Flux
J.W. Harris Stay Clean Aluminum Flux
The Harris Stay-Clean Aluminum Flux is a liquid flux for use with aluminum soldering. Use with Al-Solder 500. Works to join aluminum to dissimilar metals.
Typical Application: Recommended for soldering aluminum and aluminum to other metals.
Size: 4 oz Bottle
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Weldmark Brush Scratch CS Curved Handle 3″ X 19″
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .014 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Pferd 1-1/4″ .020 Stainless Steel Wire End brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
Diameter: |
1″ |
Weldmark Brush Scratch SS Curved Handle 3″ X 19″
Weldmark Brush Scratch SS Curved Handle 3″ X 19″
Weldmark Stainless Steel Wire Curved Handle Scratch 3X19 Brush
These are excellent industrial brushes for heavy duty cleaning purposes.
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Pferd 1-1/4″ .006 Stainless Steel Wire Crimped End brush
Stem Mounted End Brush – Crimped Wire – Stainless Steel Wire
General purpose for working hard-to-reach places. For use on portable air and electric tools. Used for rubber and plastic flash removal, paint and rust removal, die, mold and tool polishing. Stainless steel end brushes are degreased during production.
Recommended for use with suitable drive systems: straight grinders, flexible shafts and power drills.
Specifications:
Diameter: |
1″ |
Pferd 1″ .014 Stainless Steel Wire Stem Mounted End Brush
Pferd 1″ .014 Stainless Steel Wire Stem Mounted End Brush
Stem Mounted End Brush – Knot Wire, Flared Cup – Stainless Steel Wire
For heavy-duty and severe applications, recessed areas and corners such as weld and mold cleaning.
Recommended for use with suitable drive systems: straight grinders, flexible shafts. The power source should preferably be of a variable-speed type to control fill expansion. Available with coated cup to prevent damage to workpiece from metal brush components.
Specifications:
Diameter: |
1″ |
ESAB Arcair Air Carbon-Arc Gouging Torch & Cable/ Hook-Up Kit, Heavy Duty, (1000A, 80PSI / 25CFM, 7FT)
ESAB Arcair Air Carbon-Arc Gouging Torch & Cable/ Hook-Up Kit, Heavy Duty, (1000A, 80PSI / 25CFM, 7FT)
Arcair Professional Angle-Arc® K4000 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products. It’s the most copied manual gouging torch & cable in the world. K4000 Angle-Arc Manual Gouging Torch comes with 7′ 360-degree swivel cable and insulated hook-up kit. Torch accommodates 5/32″ – 1/2″ round and 5/8″ flat electrode. Air requirement is 80 psi and flow rate of 25 cfm
Applications:
Include heavy metal removal such as weld preparations in:
▪ Industrial & General Fabrication
▪ Structural Steel Fabrication
▪ Large Component
▪ Large Fabricated Objects
▪ Marine & Offshore Structures
▪ Pressure Vessels
▪ Hard Facing
Features:
▪ IMPROVED TORCH AIR FLOW – More efficient use of air supply. Improved metal removal.
▪ FOUR HOLE HEAD ASSEMBLY – Optimizes air flow to the arc. Efficiently cleans slag from groove edge.
▪ AIR ASSIST POSITIVE AIR SHUT-OFF – Minimizes air supply unit cycling on and off. Allows torch usage when air supply is marginal.
▪ IMPROVED CABLE ELECTRICAL CONDUCTION – Improves cable service life. Decreases heat build up in cable and torch.
▪ SUPERIOR OUTER CABLE COVER – Durable cover for improved cable life in a harsh environment. Resists breakdown due to exposure to heat produced by gouging.
▪ INSULATED CONNECTION BOOT & HOOK-UP KIT – Makes for easy torch hook-up. Virtually eliminates the possibility of arcing when contacting electrically hot parts.
Pferd 3 1/2″ .014 Knot Cup Brush Carbon Steel Standard Twist
Pferd 3 1/2″ .014 Knot Cup Brush Carbon Steel Standard Twist
Knot Cup Brushes – External Nut, Single Row – Standard Twist – Carbon Steel
For use on large surfaces where a great deal of roughing is required. Good for corners and angles and removal of contaminants such as scale, concrete, slag or marine growth.
Recommended for suitable drive systems: stationary machines and angle grinders. When using angle grinders, please observe permitted RPM limit of the brush.
Specifications:
Diameter: | 3-1/2″ |