Shop
Showing 1–20 of 38 results
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Tungsten Electrode 3/32” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Lincoln Viking 4C Black Welding Helmet
Lincoln Viking 4C Black Welding Helmet
FEATURES:
SPECIFICATIONS:
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
Weldmark 2% Thoriated Tungsten 1/16″ X 7″
1/16” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (MSDS) for its use.
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
CK Worldwide Layzr Tungsten 7″
CK Worldwide Layzr Tungsten 7″
Tungsten Electrode 7” Layzr Non-Radioactive
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Weldmark Variable Shade Auto-Darkening Helmet
Weldmark Variable Shade Auto-Darkening Helmet
Weldmark Auto Darkening Black Welding Helmet
Auto darkening helmet with variable shade 9-13 with grind mod.
· 3.86″
FibreMetal Tigerhood Classic Fixed Lens Helmet Shell w/5000 Mount Loop
FibreMetal Tigerhood Classic Fixed Lens Helmet Shell w/5000 Mount Loop
SEE THE DIFFERENCE QUALITY MAKES
Tigerhood™ Classic contains the features that make lightweight thermo plastic welding helmets popular with today’s welders. What makes it stand out is its performance and comfort enhancing extras that help welders produce more with fewer injuries. Molded from Noryl,® job proven superior in welding related performance characteristics, Tigerhood™ Classic is the workhorse of thermoplastic helmets. It maintains its high performance level across a wide spectrum of welding processes and working conditions. Tigerhood™ Classic has a high welder satisfaction rating because it helps welders do their job better. When welders do their job better – you gain a productivity edge.
EXCLUSIVE AIRFLOW DESIGN
Tigerhood™ Classic’s unique design provides extended throat protection while blocking fumes and smoke from the face. Size and shape allows air to circulate, to help clear any smoke and fumes that seep in.
COLORS AND SILVER COATING ALSO AVAILABLE
Molded-in colors eliminate chipping, peeling and fading. Smooth, seamless shell deflects sparks and spatter reducing the risk of burn through. Silver coating exceeds standards for abrasion, adhesion, wear and weathering and deflects heat to lower the temperature for welder comfort. All models complete with shade 10 filter lens installed.
EXTRAORDINARY COMFORT
Tigerhood™ Classic sets the standard for comfort. Its exclusive 3C, free floating headgear with multiple wearing adjustments; and its ability to comfortably accommodate protective spectacles and respirators, improves welders quality of work life. Comfortable welders have less downtime and produce more each working day.
CK Worldwide Layzr Tungsten 1/8″ X 7″
CK Worldwide Layzr Tungsten 1/8″ X 7″
Tungsten Electrode 1/8” x 7” Layzr Non-Radioactive.
Best for automated or robotic applications in alternating current (a/c) or direct current (d/c) due to low voltage tolerance (changes in tip to work piece distance) using inverter or transformer based constant current power sources. Good for low-alloyed steels, Non corroding steels, aluminum alloys, magnesium alloys, titanium alloys, nickel alloys, copper alloys. Runs cooler than 2% Thoriated with longer life, low to medium amperage range. Best for low amperage starts.
- AWS A5.12 EWG
- ISO 6848
Weldmark 2% Thoriated Tungsten 1/8″ X 7″
Weldmark 2% Thoriated Tungsten 1/8″ X 7″
1/8” X 7” Ground 2% Thoriated Tungsten Electrode
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Weldmark Camouflage Auto Darkening Welding Helmet
Weldmark Camouflage Auto Darkening Welding Helmet
Weldmark Camouflage Auto Darkening Welding Helmet
- Solar powered cell with replaceable AAA batteries
- Meet or exceed ANSI & CSA safety standards
- Three Year Lens Warranty
- High-end camo graphic designs that add style
Miller Digital Elite, Black
Miller Digital Elite, Black
WHAT’S INCLUDED
- 5 outside cover lenses
- 2 inside cover lenses
- Helmet bag
Improved Digital Controls
Redesigned Headgear
Four Arc Sensors
Four Operating Modes
X-Mode
Auto-On/Off
Quick Release Cover Lens
| GENERAL SPECIFICATIONS | |
| Title | Digital Elite™, Black |
| Net Height | 8.25 in |
| Net Length | 12 in |
| Arc Sensors | 4 |
| Net Weight | 1.13 lbs |
| Net Width | 11 in |
| Warranty | Miller’s True Blue Warranty |
| Colors Patterns | BLACK |
| Delay Control | ✔ |
| Digital | ✔ |
| Grind Mode | ✔ |
| New Headgear | ✔ |
| Low Amp TIG Rated | ✔ |
| Low Battery Indicator | ✔ |
| Modes | Cut |
| Grind | |
| Weld | |
| X-mode | |
| Reaction Time | 1/20,000 |
| Sensitivity Control | ✔ |
| Shell Material | Nylon |
| Shade Range | 5-8, 8-13 |
| Viewing Field | 9.22 in |
Jackson Passive Welding Helmet Shade Green 10
Jackson Passive Welding Helmet Shade Green 10
JACKSON SAFETY* W10 HSL 100 PASSIVE WELDING HELMET
When you need a basic welding helmet to protect your eyes and head, the Jackson Safety Fixed Shade Welding Helmet (W10 HSL 100) is a smart bet. It’s an economical way for students, welding hobbyists, professionals and inspectors to get what they need to stay safe. The Jackson Black HSL100 welding mask has a narrow shell design that’s perfect for work in tight spaces, and the helmet’s extended front increases throat protection against sparks, slag, and fumes, whether you’re working on mig welding, tig welding or arc welding. The lightweight design is made for comfort, with a large viewing area (for a clear, unobstructed view of the weld puddle) and padded head strap. The durable shield comes complete with cover plate and shade 10 polycarbonate filter plate. For the cost-conscious welder who’s ready for a terrific starter helmet, this Jackson Safety Fixed Shade 10 Welding Helmet is a smart choice.
· The welding mask has an extended front, which increases throat protection from sparks, slag, fumes and other physical hazards
· This durable shield is hard hat adaptable, comfortable and offers a large field of view for a clear view of the weld puddle (for use in mig welding, arc welding and tig welding)
· The standard shade 10 filter plate and cover plates installed at factory, but it’s adaptable to upgraded Jackson Safety ADFs like Insight, NexGen, and TrueSight II
· Meets ANSI Z87.1 – standards and is CSA compliant
Fiber Metal Tigerhood Classic Gray Helmet 2″ X 4″ Flip Lens w/Speedy Loop
Fiber Metal Tigerhood Classic Gray Helmet 2″ X 4″ Flip Lens w/Speedy Loop
CK Worldwide 2% Ceriated Tungsten
CK Worldwide 2% Ceriated Tungsten
7” 2% Ceriated Tungsten
These electrodes perform best in DC welding at low current settings but can be used proficiently in AC processes. With its excellent arc starts at low amperages, Ceriated tungsten has become popular in such applications as orbital tube and pipe fabricating, thin sheet metal work, and jobs involving small and delicate parts. Like thorium, it is best used to weld carbon steel, stainless steel, nickel alloys, and titanium, and in some cases it can replace 2 percent Thoriated electrodes. Ceriated tungsten has slightly different electrical characteristics than thorium, but most welders can’t tell the difference.
Using Ceriated electrodes at higher amperages is not recommended because higher amperages cause the oxides to migrate quickly to the heat at the tip, removing the oxide content and nullifying its process benefits.
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
CK Worldwide Lanthanated Tungsten 3/32″ X 7″
3/32” X 7” 2% Lanthanated tungsten electrodes (AWS classification EWLa-2) contain a minimum of 97.80 percent tungsten and 1.30 percent to 1.70 percent lanthanum, or Lanthana, and are known as 1.5 percent Lanthanated. These electrodes have excellent arc starting, a low Burn off rate, good arc stability, and excellent re ignition characteristics—many of the same advantages as Ceriated electrodes. Lanthanated electrodes also share the conductivity characteristics of 2 percent Thoriated tungsten. In some cases, 1.5 percent Lanthanated can replace 2 percent Thoriated without having to make significant welding program changes.
Lanthanated tungsten electrodes are ideal if you want to optimize your welding capabilities. They work well on AC or DC electrode negative with a pointed end, or they can be balled for use with AC sine wave power sources. Lanthanated tungsten maintains a sharpened point well, which is an advantage for welding steel and stainless steel on DC or AC from square wave power sources.
Unlike Thoriated tungsten, these electrodes are suitable for AC welding and, like Ceriated electrodes, allow the arc to be started and maintained at lower voltages. Compared with pure tungsten, the addition of 1.5 percent Lanthana increases the maximum current-carrying capacity by approximately 50 percent for a given electrode size.