Shop
Showing 1–20 of 28 results
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt 44-7/8″ X 1/2″ X .020 X 18 TPI MATRIX ll Portable Band Saw Blade
Dewalt DW3983 Bi-Metal Portable Band Saw Blade
The DeWalt Bi-Metal Portable Bandsaw Blades are packed with a Matrix II High-Speed Steel Edge, 8% cobalt content, and Rc 65-67 tooth hardness, DEWALT Bi-Metal Portable Bandsaw Blades can stand up to extreme heat and wear. An alloy steel backer resists fatigue.
Specifications:
▪ Length: 44 7/8 Inches
▪ Teeth Per Inch: 18
▪ Thickness: .02
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
SteelMax 14″ X 66T X 1″ Arbor Metal Cutting Saw Blade
SteelMax 14″ X 66T X 1″ Arbor Metal Cutting Saw Blade
Our industry leading Tungsten Carbide Tipped (TCT) saw blades utilize the highest quality European C6 grade tungsten carbides. With application specific tooth counts and rake geometry, Steelmax offers a TCT saw blade to cut any material for any job. You won’t find a longer lasting, higher performing or cleaner cutting TCT blade anywhere. Our blades are the choice of professional fabricators and metal workers who need to get the job done right the first time. Steelmax TCT blades are designed for clean and cool cutting of mild steel, stainless steel, aluminum and thin steel. Our blades are also designed to fit competitor’s saws to increase their cutting efficiency.
FEATURES
▪ High quality C6 tungsten carbide tips
▪ Clean cuts with fewer sparks and burrs
▪ Cool cutting
▪ Designed with varying tooth counts and rake angles for specific applications
▪ Safer alternative to abrasive cut-off wheels
Lenox 6″ (152mm) 18TPI T2 Bi-metal Reciprocating Saw Blade
Lenox 6″ (152mm) 18TPI T2 Bi-metal Reciprocating Saw Blade
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
Lenox T2 Bi-Metal Reciprocating Saw Blades, 8″ X 3/4″, 18 TPI, Soft Metal
Lenox T2 Bi-Metal Reciprocating Saw Blades, 8″ X 3/4″, 18 TPI, Soft Metal
POWER BLAST TECHNOLOGY INCREASES BLADE LIFE
High speed blasting along the cutting edge strengthens the blade to reduce breaks and increase durability
LONGER BLADE LIFE & INCREASED VERSATILITY
Patented T2 Technology reduces cutting forces on each tooth and optimizes chip removal to allow efficient cutting in the widest range of materials
ESAB Arcair Air Carbon-Arc Gouging Torch & Cable/ Hook-Up Kit, Heavy Duty, (1000A, 80PSI / 25CFM, 7FT)
ESAB Arcair Air Carbon-Arc Gouging Torch & Cable/ Hook-Up Kit, Heavy Duty, (1000A, 80PSI / 25CFM, 7FT)
Arcair Professional Angle-Arc® K4000 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products. It’s the most copied manual gouging torch & cable in the world. K4000 Angle-Arc Manual Gouging Torch comes with 7′ 360-degree swivel cable and insulated hook-up kit. Torch accommodates 5/32″ – 1/2″ round and 5/8″ flat electrode. Air requirement is 80 psi and flow rate of 25 cfm
Applications:
Include heavy metal removal such as weld preparations in:
▪ Industrial & General Fabrication
▪ Structural Steel Fabrication
▪ Large Component
▪ Large Fabricated Objects
▪ Marine & Offshore Structures
▪ Pressure Vessels
▪ Hard Facing
Features:
▪ IMPROVED TORCH AIR FLOW – More efficient use of air supply. Improved metal removal.
▪ FOUR HOLE HEAD ASSEMBLY – Optimizes air flow to the arc. Efficiently cleans slag from groove edge.
▪ AIR ASSIST POSITIVE AIR SHUT-OFF – Minimizes air supply unit cycling on and off. Allows torch usage when air supply is marginal.
▪ IMPROVED CABLE ELECTRICAL CONDUCTION – Improves cable service life. Decreases heat build up in cable and torch.
▪ SUPERIOR OUTER CABLE COVER – Durable cover for improved cable life in a harsh environment. Resists breakdown due to exposure to heat produced by gouging.
▪ INSULATED CONNECTION BOOT & HOOK-UP KIT – Makes for easy torch hook-up. Virtually eliminates the possibility of arcing when contacting electrically hot parts.