Shop
Showing 1–20 of 22 results
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Miller Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Miller Style
- Gas: Carbon Dioxide
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
ATT Head Tube For M-25 Series 100 – 250 Amp MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Bernard 45° Tube Assembly for Q-Gun Series MIG Guns
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
Western Hotspotter WB-101 Heavy-Duty Flame Propane Tool Kit
This Hotspotter is an all-purpose propane flame tool that operates off the pressure of a standard propane tank-no regulator required. Ergonomic handle with adjustable trigger. Hooks up to standard 20 lb. Propane tank. Operates with no smoke and no fumes.
Appropriate for a wide variety of all-season maintenance/repair applications at commercial offices, factories, institutions, warehouses, parks, residential properties, farms, and parking lots.
Some uses include:
▪ Burn weeds
▪ Repair asphalt
▪ Seal tar
▪ Peel paint
▪ Remove road markings
▪ Melt ice
▪ Thaw pipes
Features and Specifications:
▪ Delivers up to 550,000 BTU
▪ Durable 10 ft. neoprene hose
▪ Accurate brass flow control shut-off valve
▪ Brass propane tank adaptor
▪ Spark ignitor
▪ Durable cast iron and steel nozzle (WB-101)
▪ Welded tube nozzle (WB-100 & WB-102)
▪ 31″ Heavy-Duty Handle
▪ Meets NFPA 51 specifications
▪ Excess Flow Valve
▪ One year warranty
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor TurboTorch Sof-Flame WA-400 Acetylene Torch Handle
Victor Turbo Torch Genuine Sof-Flame WA-400 Acetylene Torch Handle for your Sof-Flame soldering equipment. Handle accepts all S series tips and most major brands of “screw-in” soldering tips.
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Miller-Smith Heavy Duty 90 Degree SC Cutting Attachment
Cuts up to 8-inch (203 mm) thick steel. Solid silver-brazed construction. Features o-ring seating and easy-to-change slip-in Graf-Tite cutting tips with cost-saving soft seats. Use with any industrial fuel gases “” acetylene, propane, natural gas, propylene, hydrogen, and many others. Several models of standard and special-purpose tips are available for use in SC200 Series cutting attachments. SC200 series torch handles are covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Handles:
- WH200A
Compatible Tips: Welding: SC Series Tips
FEATURES:
SPECIFICATIONS:
Miller M-100 10′ MIG Gun
Miller M-100 10′ MIG Gun
Miller MIGmatic M-100 100Amp Air-Cooled MIG Welding Gun
Processes
· MIG
· Flux Cored
Features
· 3 piece nozzle construction extends nozzle life by reducing wear and helps prevent rocking of nozzle on contact tip adapter
· Interchangeable contact tips
· Brass contact tip adaptor helps prevent galling, sticking & stripping of threads
· Single piece high-impact handle is almost indestructible with ergonomic design
· Steel spring strain relief protects power cable from wear and helps prevent liner from kinking, allowing better wire feed ability.
· 360° rotatable gooseneck
· Interchangeable monocoil liners
Specifications
· Cable Length: 10′
· Rated Output: 100A
· Duty Cycle: 100% with CO2 gas, 60% with mixed gas
· Standard Wire Size: .030″
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Miller Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Miller Style
- Gas: Carbon Dioxide
ESAB Arcair Air Carbon-Arc Gouging Torch & Cable/ Hook-Up Kit, Heavy Duty, (1000A, 80PSI / 25CFM, 7FT)
ESAB Arcair Air Carbon-Arc Gouging Torch & Cable/ Hook-Up Kit, Heavy Duty, (1000A, 80PSI / 25CFM, 7FT)
Arcair Professional Angle-Arc® K4000 is part of the manual gouging torch & cable assemblies offered by the industry leader in the air carbon-arc products. It’s the most copied manual gouging torch & cable in the world. K4000 Angle-Arc Manual Gouging Torch comes with 7′ 360-degree swivel cable and insulated hook-up kit. Torch accommodates 5/32″ – 1/2″ round and 5/8″ flat electrode. Air requirement is 80 psi and flow rate of 25 cfm
Applications:
Include heavy metal removal such as weld preparations in:
▪ Industrial & General Fabrication
▪ Structural Steel Fabrication
▪ Large Component
▪ Large Fabricated Objects
▪ Marine & Offshore Structures
▪ Pressure Vessels
▪ Hard Facing
Features:
▪ IMPROVED TORCH AIR FLOW – More efficient use of air supply. Improved metal removal.
▪ FOUR HOLE HEAD ASSEMBLY – Optimizes air flow to the arc. Efficiently cleans slag from groove edge.
▪ AIR ASSIST POSITIVE AIR SHUT-OFF – Minimizes air supply unit cycling on and off. Allows torch usage when air supply is marginal.
▪ IMPROVED CABLE ELECTRICAL CONDUCTION – Improves cable service life. Decreases heat build up in cable and torch.
▪ SUPERIOR OUTER CABLE COVER – Durable cover for improved cable life in a harsh environment. Resists breakdown due to exposure to heat produced by gouging.
▪ INSULATED CONNECTION BOOT & HOOK-UP KIT – Makes for easy torch hook-up. Virtually eliminates the possibility of arcing when contacting electrically hot parts.
Miller-Smith Heavy Duty Cutting Torch Handle
Miller-Smith Heavy Duty Cutting Torch Handle
Heavy-duty handle allows high gas flow for large cutting tips and heating tips. Heavy-duty handles have replaceable hose connections. “B”-size inlet connections are 9/16″-18. Length: 7.5 inches (191 mm). Torches have silver-brazed joints to provide overall strength and rigidity for safe performance under rugged conditions. Works with all SC Series cutting tips, ST Series heating tips and SW Series welding tips.WH200A torch handle is covered by our lifetime warranty when used with authentic Miller | Smith tips.
Compatible Cutting Attachments:
• SC209
• SC205
FEATURES:
Victor ST1000FC VanGuard Heavy Duty Cutting Torch With 90° Head
Victor ST1000FC VanGuard Heavy Duty Cutting Torch With 90° Head
Genuine Victor® ST 1000FC is a heavy-duty straight cutting torch with bottom, rear-mounted cutting oxygen valve lever. It designed for use in scrap yards, demolition and foundry work. The ST 1000FC has a forged 90° brass head with stainless steel gas tubes and comes complete with built-in reverse flow check valves and flashback arrestors. It can cut up to 5 inch thick steel using Victor “1” series cutting tips. For use with any fuel gas, 5 PSIG and above. Hose connection – 9/16″-18 (B)
Victor 100FC 100 Series “VanGuard” Medium Duty Torch Handle
Victor 100FC 100 Series “VanGuard” Medium Duty Torch Handle
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
Tweco Flux Core SEFC 350A Lincoln Style 15′ MIG Gun
TWECO Fluxcored SEFC MIG Gun
350 AMP 60% Duty cycle MIG gun with Lincoln Style rear connectors. Suitable for medium/heavy duty fabrication
Features:
- For use with all gasless wires
- High Impact-Resistant One-Piece “Straight” Handle
- Metal “Paddle” style trigger lever
- Micro-Switch Trigger Design incorporates a button style switch for start/stop wire feed
- Spare Trigger Leads in Cablehoz
- Heavy Duty design and front-end consumables
- Rugged & Duraable power Cablehoz with proven abrasion & heat ressitance
Specifications:
- Amps: 350 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: 3/32″
- Connector: Lincoln Style fits LN 7, 8, 9 , SP200
- Gas: Carbon Dioxide
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Lincoln Magnum 100L Gun 10′ .025-.045 Liner
Semiautomatic Gas-Shielded Guns
Magnum® guns for MIG or flux-cored welding feature our classic curved handle and are available in a number of amperage ranges for use in many applications.
Top Features
· Extremely small, lightweight gun that’s great for most home, farm and small shop projects, auto body work and light maintenance or repair applications. Includes gun connector.
· One-piece modular trigger assembly – Molded out of high heat resistant material to withstand head and spatter and ensure long life.
· Gun tube design – Armored with an electrically insulated metal jacket optimizing fine wire welding performance.
· Abrasion-resistant, extruded rubber jacket – Adds strength and long life to the cable.
· Classic curved handle – Lightweight and balanced, providing a comfortable grip to reduce fatigue.
Processes
Flux-Core Gas Shielded
Wire Diameter Range
.025-.045 in. (0.6-1.2 mm)
What’s Included
· Contact Tip
· Gas Diffuser
· Gas Nozzle
· Insulator
· Cable Liner
· Gun Tube (60°)
Tweco Classic No. 3 .035″-.045″ Tweco Style 15′ MIG Gun
Tweco Classic No. 3 .035″-.045″ Tweco Style 15′ MIG Gun
Tweco Classic 3 Air Cooled MIG Gun 300 Amp
300 AMP 60 Duty cycle MIG gun with Miller rear connectors. Suitable for medium/heavy duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
- Enhanced direct plug capabilities
Specifications:
- Amps: 300 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .045″
- Connector: Tweco Style
- Gas: Carbon Dioxide
Tweco Classic No. 2 .030″-.035″ Tweco Style 15′ MIG Gun
Tweco Classic No. 2 .030″-.035″ Tweco Style 15′ MIG Gun
TWECO Classic 2 Air Cooled 200 Amp MIG Gun
200 AMP 60% Duty cycle MIG with TWECO rear connector suitable for medium duty fabrication.
Features:
- Wide selection of front end consumables available to fit the needs of the application
- Industry standard for 40+ years, oval shaped handle reduces grip required to manipulate MIG gun position
- Balanced to pivot at the center of the handle for ease of use in different welding positions, and thereby reduces operator fatigue
- Gun hanger located at the bottom for ease of resting gun when not in use
- Heavy-duty design for industrial application environments using special plastic composition for high impact crush-resistant handle
- Steel spring strain relief provides support to the Cablehoz® coming out the rear of the handle to minimize wire feed issues
- Mechanical connection of conductor tube and cablehoz within the handle providing excellent current path to the end of the contact tip
- Two (2) ball-point screws are used to secure the Cablehoz® and conductor tube in place
- Trigger contains silver plated contacts with a self cleaning action every time the trigger is engaged & disengaged
- Metal jacket conductor tube
Specifications:
- Amps: 200 A
- Cooling: Air
- Duty Cycle: 60%
- Wire Diameter: .035″
- Connector: Tweco Style
- Gas: Carbon Dioxide