Shop
Showing 61–80 of 762 results
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Weld-Aid 6 Pack Lube-Matic Wire Lube Pads-Black
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Weldmark 2% Thoriated Tungsten 3/32″ X 7″
Tungsten Electrode 3/32” X 7” Ground 2% Thoriated Tungsten
Extremely long lasting and highly durable, these electrodes are a staple in DC welding applications. They are the most commonly used electrodes today and are preferred for their longevity and ease of use. Thorium increases the electron emission qualities of the electrode, which improves arc starts and allows for a higher current-carrying capacity. This electrode operates far below its melting temperature, which results in a considerably lower rate of consumption and eliminates arc wandering for greater stability. Compared with other electrodes, Thoriated electrodes deposit less tungsten into the weld puddle, so they cause less weld contamination.
These electrodes are used mainly for specialty AC welding (such as thin-gauge aluminum and material less than 0.060 inch) and DC welding, either electrode negative or straight polarity, on carbon steel, stainless steel, nickel, and titanium.
During manufacturing, thorium is evenly dispersed throughout the electrode, which helps the tungsten maintain its sharpened edge—the ideal electrode shape for welding thin steel—after grinding. Note: Thorium is radioactive; therefore, you must always follow the manufacturer’s warnings, instructions, and the Safety Data Sheet (SDS) for its use.
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
Weldmark TIG Collet 3/32″ For HW-17, 18, 26 Torches 5pk
StormFront-FR, Rain Suit, 3 Piece
StormFront-FR, Rain Suit, 3 Piece
Product Description
The Cordova Safety Products brand StormFront-FR™ rain gear is Cordova’s most popular rain brand. It is constructed of yellow, .35 mm PVC/Polyester fabric and is available as rain suits or separate jackets and pants. The Stormfront-FR™ three-piece rain suit is flame resistant per ASTM D6413. It is equipped with a detachable hood with drawstring and ventilated cape back and underarms. It also offers two flapped pockets, a storm fly front with both zipper and snap buttons, and bib-style pants with suspenders and snap fly.
- Stormfront-HV™ 3-Piece Rain Suit
- Yellow, .35 mm. PVC/Polyester Fabric
- Detachable Hood with Drawstring
- Corduroy Collar
- Ventilated Cape Back & Underarms
- Two Flapped Pockets
- Storm Fly Front with Zipper & Snap Buttons
- Bib-Style Pants with Suspenders & Snap Fly
Certification/Rating: Flame Resistant (ASTM D6413)
Tillman Winter Glove
Tillman Winter Glove
Features
- Rugged, bourbon brown, select Shoulder split leather Cowhide.
- Heavy duty pile lining for extra warmth.
- Includes a Gunn Cut with Keystone thumb for easy movement.
- Double stitching on forefinger provides extra strength.
Black Stallion FR Cotton & Cowhide Hybrid Welding Jacket, Royal Blue
Black Stallion FR Cotton & Cowhide Hybrid Welding Jacket, Royal Blue
BEST OF BOTH WORLDS
With a Black Stallion® Hybrid Welding Jacket, you get the best of both worlds; rugged leather sleeves shield arms from sparks and spatter, while breathable cotton protects the torso
FEATURES & BENEFITS
- Split cowhide sleeves
- 9 oz. flame-resistant cotton body
- Standup welder’s collar
- Dual scribe pockets
- Snap front and wrists
- 30″ length
Estwing Welding/chipping Hammer
Estwing Welding/chipping Hammer
This Welding Chipping Hammer has a bonded and molded Shock Reduction Grip® which offers the utmost in both comfort and durability, while reducing vibrations caused by impact. Estwing hammers are the only hammers that can make this claim. The head and handle are forged in one piece and are fully polished.
FEATURES:
▪ Solid America Steel
▪ 11″ overall length
▪ 14 oz. head weight
▪ Blue Shock Reduction Grip®
▪ Made in the U.S.A.
Miller Millermatic 211 MIG Welder With Advanced Auto-Set
Miller Millermatic 211 MIG Welder With Advanced Auto-Set
Comes complete with:
- Power source
- 10 ft. (3 m) MDX™-100 MIG gun
- 10 ft. (3 m) work cable with clamp
- 5 ft. (2 m) power cord with MVP™ plugs for 120 V and 240 V
- Flow gauge regulator and gas hose for argon or AR/CO2 mix
- Hobart® spool of .030 in. (0.8 mm) solid wire
- Two contact tips for .030 in. (0.8 mm) wire
- Quick Select™ drive rolls for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire
- Material thickness gauge
- Hook-and-loop cord wraps
Nitrogen
Nitrogen
Purchase Cylinder
Purchase Price Includes: Cylinder + Gas + Fees
Details
▪ Cylinder will come with valid DOT stamp, current hydrostatic test stamp, and a record of ownership.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Purchased cylinders may be exchanged or refilled at any gas supplier
Lease Cylinder
Lease Price Includes: A Full Cylinder + Maintenance Costs
Details
▪ 5 year lease length
▪ Early termination of the lease is available without additional charges.
▪ Leased cylinders can only be refilled/exchanged at a Toll location.
▪ Cylinder exchange/refills charges are not included in lease and will be charged at the time of exchange.
▪ Cylinder appearance will vary and is not guaranteed to look new.
▪ Leased cylinders must be returned at the end of the lease agreement or customer will be charged the replacement cost of the cylinder.
Exchange/Refill Cylinder
Price Includes: Gas + Fees
Details
▪ Only cylinders owned by customer, rented or leased from Toll are eligible for exchange/refill.
▪ Empty cylinders can be exchanged for a full cylinder at store location.
▪ Exchanged tank will be of like gas and size.
▪ An additional hydrostatic test fee may apply on customer owned cylinders upon visual inspection.
▪ Cylinder appearance is not guaranteed to look new or be of similar condition as the cylinder that is exchanged.
Other Options Available In Store:
Rent Cylinder
Cylinders are available to rent daily, weekly, and monthly upon approved credit. Please contact us directly for details.
Cylinder Disposal
Cylinder disposal or recycling is available for common gases. We reserve the right to refuse any cylinder upon visual inspection.
Cylinders we will not accept for disposal include:
▪ Inhalation hazard
▪ Poisons
▪ Refrigerants
▪ Any cylinders with a missing label
▪ Uncommon cylinder sizes
Jackson F50 34-63 IRUV 3.0 Polycarbonate Face Shield 15-1/2″ X 8″
Jackson F50 34-63 IRUV 3.0 Polycarbonate Face Shield 15-1/2″ X 8″
Direct Safey Dakota Anti-Fog Safety Glasses
Direct Safey Dakota Anti-Fog Safety Glasses
Direct Safey Dakota Anti Fog and Hardcoat Lens Safety Glasses
Features and Benefits
- One-piece wraparound for wide view
- hardcoat lenses
Applications
- General purpose eye protection
- Areas where protection against bright lighting is needed
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark 1/8″ TIG Gas Lens Collet Body For HW-20, 9, 25 Torches
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark Nitrogen Purging Regulator Tpr250-500-580 CGA-580
Weldmark by Victor Purging Regulator
Weldmark by Victor single-stage purging regulator features a durable forged brass body and cap with a high delivery pressure. They also feature easy-to-read gauges, and a stem-type seat mechanism for accurate gas flow.
Primarily used by HVAC professionals for nitrogen purging. May be used with helium, argon, co2 or any other inert gas.
Specifications:
- Gas Service: Inert Gas
- CGA: 580
- Outlet Connection: ¼”-37
- Delivery Pressure: 500 psig
- Max Inlet Pressure: 3000 psig
Miller .035-.040 Contact Tip For Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .035-.040 Contact Tip For Spoolmatic, XR And XR-Edge Series MIG Guns
Miller .035” – .040” Heavy Duty Contact Tip
Compatible with MIG Guns:
▪ Spoolmatic
▪ XR Series
▪ XR Edge Series
Lincoln Excalibur 8018-B2 MR
Lincoln Excalibur 8018-B2 MR
Top Features
- Designed for welding 1.25% chromium, 0.50% molybdenum steel
- Premium arc performance
- Square coating burn-off
- Capable of producing weld deposits with 550 MPa (80 ksi) tensile strength after 8 hours of stress-relieving at 690°C (1275°F)
Typical Applications
- Power generation
- Petrochemical
- Pressure vessels
- Process piping
Welding Positions
All, except vertical down
Tillman Cut Resistant MIG Glove
Tillman Cut Resistant MIG Glove
ANSI A7 Cut Resistant MIG Glove
Tillman’s 1357 MIG glove is designed so that dexterity is not compromised and comfort is emphasized. Tillman searched for soft, pliable top grain and split Cowhide to provide that broken in feeling even with an ANSI A7 cut liner. With the 1357, the user has a great sense of feel and touch to effectively perform tasks and lay down incredible welds. The 1357 offers a seamless forefinger for a great feel on the MIG trigger to help laying down a precise weld.
Features
- ANSI A7 cut resistance is achieved with a Dupont™ Kevlar® lining for unbeatable cut resistance, dexterity and comfort.
- Long lasting top grain Cowhide palm and fingers is soft and pliable and provides excellent tactile performance you expect from Tillman.
- Flexible wing thumb allows greater movement for a great grip on the gun or a torch.
- Top grain seamless index finger provides a natural feel on the trigger.
- A comfortable glove for MIG welding and material handling.
- Sewn with DuPont™ Kevlar® for added strength and resistance to spark and spatter for a longer life of the glove.
- Offered in sizes M, L for other sizes contact leads@tollgas.com
Lincoln Viking 4C Black Welding Helmet
Lincoln Viking 4C Black Welding Helmet
FEATURES:
SPECIFICATIONS:
ESAB Rebel EMP 235ic Multi-Process Welder
ESAB Rebel EMP 235ic Multi-Process Welder
Introducing Rebel EMP 235ic – the next level Rebel welding machine that offers TRUE multi-process performance in a portable package. When it comes to getting around and getting work done, Rebel EMP 235ic is second to none. It is the most mobile welder in its class and has the power and performance to crush even the most demanding jobs.
PACKAGE INCLUDES:
▪ Rebel EMP 235ic power supply
▪ Tweco SprayMaster 250 MIG gun
▪ Victor argon flowmeter regulator
▪ 12.5 ft. (3.8 m) hose
▪ return clamp with leads, drive rolls and contact tips
▪ .035 in. (0.9 mm) wire
▪ electrode holder
▪ ESAB Atom Arc 7018 electrodes
▪ power adapter
▪ operator’s manual
Weldmark 300 Amp Ground Clamp with Copper Flat Jaw
Weldmark 300 Amp Ground Clamp with Copper Flat Jaw
Weldmark Copper Ground Clamp – 300 Amp
Features
· Copper cast upper and lower jaws
· Insulated Spring
· Heavy Duty Spring providing the clamping force to the work surface
Specifications
· Material Composition: Copper Casting
· Amperage Capacity: 300
· Jaw Opening Depth: 4″
· Applications: Light Duty Metal Fabrication
· Overall Length: 8.5″
· Cable Connection: Ball-Point thru 3/0
· Jaw Opening: 1.5″
· Process(es): SMAW, SAW, GMAW, FCAW, GTAW
Victor Performer 540/510 Edge 2.0
Victor Performer 540/510 Edge 2.0
This medium duty torch set replaced the previous version (0384-2045)
The new and improved Victor Edge 2.0 series regulators an updated gauge with enhanced colored face for easy reading.
- Cuts 1/2 inch (up to 6 inches with optional tips)
- Welds 1/4 inch (up to 1.25 inches with optional nozzle)
- Edge 2.0 Regulators
- 5 Year Warranty
- This kit is for use with Acetylene